No I haven't. But still play with my stoves thou.
Oddball wanted verification of stove date. But oddball don't seem to exist.
msr stove pic. slightly used but in pristine condition with custom burner plate n all. date numbers [ATTACH] Bloody thing still works !!!...
I did one once. Cut off a butane nipple seat of a dead burner. Used that as a nipple seat and brazed it in the lipstick top. The jets you can...
8 thou orifice. I took a jet and tried to figure it out. Unfortunately its all a blurr and can't determine much. Guess we are both out of luck. 48...
You got one that needs fixing??? I'll See If I can take some measurements. The jet is 10 thou if i remember new.
Just put a red hot rod down on the nrv to loosen the lead washer has worked for me. :oops: except for the time the end cap fell in the tank and...
My older sigg bottle and firejet stove are sort of mated. I won't use it in any other bottle. It has conformed to the threads. The earlier Sigg...
Ever tried putting out a meths fire with water??? It takes a lot more than you think if the surrounds are hot as well. Think of a bucket...
Since they were in use in the antartic up until recently. Well they have sold off a lot of stoves last year. (I'm only presuming here) I can't see...
Go take the tank cap down to the local machine shop and buy an o-ring thats fits neat in the inside of the cap. A thick one. It will squeeze down...
To run kero in the m50 mine anyways. Try a 5/8 washer on the burner rebound plate. O.d is about 35mm thickish one. I also wrapped some wire...
Well I'll be !!!! I find shellite more fumey and offensive than kero in the smell. I tend to get weird dreams if I use it in an enclosed space....
Diggers Kero $45 for 20 ltres at the moment. Rocol R55 shellite has 3% aromics in it. Its not 100% naphta. Goes off quicker than coleman fuel...
Guzz I think you are right on that. Looks to me to be a strainer for a garden pump. Most likey a stirrip pump with the ball valve down the bottom...
I think that one is the metho burner they made. Could be wrong as usual thou. If the diagram I saw was right there should be a cup like thing in...
I like the leg assembly. I'm a bit partial to a stovette nothing fancy nor bits to assemble. Plunk it down prime and pump. Chunk it the box...
Well Half of one at least. Same as the other N0 60 posted here except no crowns to be found. Few pics. [ATTACH] Burner just says sweden sweden...
Nahh won't do much too it.Kerophile. The riser/burner assembly screws onto the tank. Same tank thread as the 45 no jiggery pokeryneeded. Legs are...
After a quick fettle and some borrowed parts. namely legs and a flame spreader. I decided to knock up a rough travel cap/pump knob for it. O.k....
Separate names with a comma.