1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

COMPANION (SVEA) with Roarer Burner

Discussion in 'Companion' started by ROBBO55, May 21, 2015.

  1. ROBBO55

    ROBBO55 Subscriber

    Offline
    Joined:
    Oct 27, 2014
    Messages:
    229
    Location:
    Somersby, New South Wales, Australia
    The tank is stamped COMPANION STOVE with the SVEA logo.
    The spirit cup has COMPANION SVEA PATTERN stamped in the bottom (other Companions I have seen do not have SVEA PATTERN).
    The tank filler cap has COMPANION stamped in one side.
    The pressure bleed is cast with COMPANION on one side and SVEA on the other (raised letters).
    The burner has COMPANION SVEA cast in the top (raised letters).
    The leather pump cup assembly is a riveted construction. The assembly is not fixed and slides on the shaft allowing air entry on the up stroke. It is held on the shaft by a brass nut. The NRV is standard.
    The flame ring was missing.
    Martin

    1432194684-P1_opt.jpg
    1432194708-P2_opt.jpg 1432194727-P3_opt.jpg 1432194803-P4_opt__1_.jpg 1432194833-P5_opt.jpg 1432194857-P6_opt.jpg 1432194883-P7_opt.jpg 1432194903-P8_opt.jpg 1432194923-P9_opt.jpg
     
    Last edited by a moderator: Jun 27, 2015
  2. Tony Press

    Tony Press Australia Subscriber

    Offline
    Joined:
    Jun 8, 2013
    Messages:
    2,574
  3. Sedgman

    Offline
    Joined:
    Dec 1, 2014
    Messages:
    140
    Location:
    Rainbow, Vic, Australia
    very well restored and looks a million dollars. the Companion varieties are a step closer to a resolution too. :thumbup:

    Iain
     

Share This Page