Hi. I just found this Hasag No. 10. It is in pretty good shape, but not complete. Wrong (Radius UFO) burner, missing the cast iron trivet, pump leather and two or three of the pan supports. At least two of them are home made. My stove looks very much like this: Hasag No.10 I notice both has no number at the pump «knob», and has identical filler caps/air release screws, and other details. I believe this stove should have a normal roarer burner? I think only the left-most (see photo) pan support is original - can anyone confirm that? It is «cut in half» at the lower end. Also I would appreciate a photo to show the pump leather details.
One of my regular kitchen users is this stove, formerly owned by @igh371. I'd say the left hand leg is original, the cut out at the bottom is certainly needed due to the profile of the tank. Here are the two legs on mine, the third has been soldered in place. The brass tubes improve the fit but I'm not sure of originality. The legs are just over 6.5mm diameter. Here's the pump rod components. This was timely as my stove needed a new leather! Both the 'nut' of the leather carrier and the 'nut' retaining the carrier assembly on the shaft are plain round machinings with no provision to grip for removal.
Thank You, @Blackdog . On mine, there are threads so the larger plate/washer is screwed on and firmly fixed to the rod.
Looks a completely different design with steel pump rod... mind you I have no idea whether mine is original or not!
