Phoebus 625

Discussion in 'Fettling Forum' started by jenspetter 123, Jan 19, 2011.

  1. jenspetter 123

    Offline
    Joined:
    Sep 30, 2006
    Messages:
    220
    Hi all

    I got a Phoebus 625 that is missing it`s stove pot support (3ea) What is the length of the originals?

    Regards

    Jens
     
  2. Doc Mark

    Doc Mark SotM Winner Subscriber

    Offline
    Joined:
    Dec 12, 2004
    Messages:
    19,157
    Location:
    So. California Mountains
    Hi, Jens,

    Here are some photos of one of the legs on my Phoebus 625, one of which shows the length, in mm.

    1295454613-DSCN0107.JPG

    1295454632-DSCN0108.JPG

    1295454649-DSCN0109.JPG

    You can see from the last photo, that each leg has a bend in the top, which accommodates fitting the stove back into the round can in which it originally came. I hope this helps, and have fun with your Phoebus 625! They are outstanding stoves, and worth workhorses!! Take care, and God Bless!

    Every Good Wish,
    Doc
     
    Last edited by a moderator: Jun 26, 2015
  3. Knight84

    Offline
    Joined:
    Jan 21, 2009
    Messages:
    3,236
    I just sold a set on eBay. :doh:

    Jeff
     
  4. jenspetter 123

    Offline
    Joined:
    Sep 30, 2006
    Messages:
    220
    Hi Doc

    Thank you very much for taking the time to find and measure the legs!!!. I see if i can find some that will fit and has the same length. I do not have the round box. My 625 came with some kind of water heater setup, but unfired!

    Jeff

    Had a bid on those,but went over my limit

    Regards

    Jens
     
  5. loco7stove

    loco7stove Subscriber

    Offline
    Joined:
    Sep 30, 2010
    Messages:
    1,392
    Hi Jens ,if your stuck i can make you some legs ( see my leg jig post in the fettling forum ) may even be able to put the bend in but if not i can make a straight set to fit ,PT me if your interested ,best regards Stu.
     
  6. Doc Mark

    Doc Mark SotM Winner Subscriber

    Offline
    Joined:
    Dec 12, 2004
    Messages:
    19,157
    Location:
    So. California Mountains
    Hi, Jens,

    You are very welcome, Sir! Glad to be able to help. Most of the time, I have to spend lots of time trying to dig through boxes down in the Hobbit Hole, in order find whatever I may be seeking. However, this time, I knew, exactly, where one of my Phoebus 625's was, and also where my caliper was, to! ;) :lol: :lol: You will love your 625, I'm betting. They are wonderfully reliable, very powerful, and delightfully simmering stoves!! Congrats on getting yours. Take care, and God Bless!

    Every Good Wish,
    Doc
     
  7. ajvuik

    ajvuik Subscriber

    Offline
    Joined:
    Aug 4, 2007
    Messages:
    797
    Location:
    Netherlands
    I can't make any promises, but I'll check my big box of... stuff... and I may be able to hook you up with a set of legs for the 625, if you want.

    I'll be home in about 2~3 hours.

    I'll be back!
     
  8. RonPH

    Offline
    Joined:
    May 1, 2009
    Messages:
    5,870
    Doc am surprised really! Did you get the hobbit hole organized?

    Ron
     
  9. Knight84

    Offline
    Joined:
    Jan 21, 2009
    Messages:
    3,236
    Good luck making the legs for cheaper.

    Jeff
     
  10. ajvuik

    ajvuik Subscriber

    Offline
    Joined:
    Aug 4, 2007
    Messages:
    797
    Location:
    Netherlands
    Yes, as I thought. I have an old, beaten up phoebus 625 here. The poor thing is beaten up and the wind shield is all but gone, has no paint left on the tank and the burner is fully gunked up from the car gas that the previous owner has fully used in it.

    But the pot supports are in very good shape. I will post a picture when my cell phone/mobile has some juice back in it's battery.

    I was planing on fixing it back up, but I found a nice, almost, unused 625 not much later and this has been sitting in the back of my junk box for almost 3 years now.

    If you want I'll send you the pan supports. Just give me your adres and they are yours. If you need other parts, please let me know and I'll see in what state they are and worth sending.

    Regards,

    Arjan.
     
  11. jenspetter 123

    Offline
    Joined:
    Sep 30, 2006
    Messages:
    220
    Hi Arjan

    Thanks for your generous offer! I will PM my adress and we will agree on the terms.

    You other guys.Thank you for your offerings. Much appreciated.

    Regards

    Jens
     
  12. RonPH

    Offline
    Joined:
    May 1, 2009
    Messages:
    5,870
    Arjan, your are indeed a good man :thumbup:

    Ron
     
  13. ajvuik

    ajvuik Subscriber

    Offline
    Joined:
    Aug 4, 2007
    Messages:
    797
    Location:
    Netherlands
    Ok, Jens. The support are yours.

    Just for grins, I added the pictures I promised. :content:
    1295592094-21012011274__Small_.jpg 1295592109-21012011275__Small_.jpg

    I'll see if I can send them your way today.

    regards,

    Arjan.
     
    Last edited by a moderator: Jun 26, 2015
  14. Doc Mark

    Doc Mark SotM Winner Subscriber

    Offline
    Joined:
    Dec 12, 2004
    Messages:
    19,157
    Location:
    So. California Mountains
    Good Morning, Arjan, and All,

    Here, my Friends, is the true spirit of CCS!! Well done, Arjan! Congrats, Jens!! All is good in the world! If only all the world worked as well as we do here at CCS, it would truly be wonderful! Again, well done, Arjan! Take cafe, and God Bless!

    Every Good Wish,
    Doc
     
  15. ajvuik

    ajvuik Subscriber

    Offline
    Joined:
    Aug 4, 2007
    Messages:
    797
    Location:
    Netherlands
    Hi all,

    Well I was lucky and I got home from work early today, so I was able to send the legs to you Jens.

    Thanks Doc for your praise, but there is no need. Like I said, the legs have been in the back of some box for 3 years. If i can help a fellow stovie with them... I am more then happy to send Jens the legs.

    regards,

    Arjan.
     
  16. jenspetter 123

    Offline
    Joined:
    Sep 30, 2006
    Messages:
    220
    Hi all

    Arjans pot support arrived yesterday.

    As promised:
    1296419818-DSC00201.JPG

    Sorry about the quality (cell phone). Thank you very much Arjan for your kindness!! :lol:

    If I can do anything for you. Do not hesitate to contact me!

    Regards

    Jens
     
    Last edited by a moderator: Jun 26, 2015
  17. Doc Mark

    Doc Mark SotM Winner Subscriber

    Offline
    Joined:
    Dec 12, 2004
    Messages:
    19,157
    Location:
    So. California Mountains
    Hey, Jens and Arjan,

    Outstanding deal, all around, my Friends!! Well done, and thanks for sharing the particulars with us! Congrats, Jens, on getting your 625 up and running. GREAT stoves, don't you think!?!! :thumbup: :thumbup: Take care, and God Bless!

    Every Good Wish,
    Doc
     
  18. ajvuik

    ajvuik Subscriber

    Offline
    Joined:
    Aug 4, 2007
    Messages:
    797
    Location:
    Netherlands
    Hey Jens and the rest,

    Good to see that they arrived safely. Have fun with the stove.

    I also would love to see some flame shots of the stove, if that is not to demanding. :content: Then I'll also make some action shot of mine ;)

    regards,

    Arjan