The mail just arrived with a carton of diamonds in the rough ! Amongst the carbon and corrosion I found this gem , a simmering plate ! Had to search the site here to find out what it was , This box keep me occupied over the weekend.
@Tony Press I was pleased with the plate . I got a load of other bits and bobs including an ancient looking tobacco tin full of cleaning needles (some whole , some broken)for regulator burners and several wick burners for lamps ! The chrome stove is a Radius No.7 fitted with an incomplete regulator burner . Nothing spectacular but always fun to save old stoves .
Had a go at sorting out the bipedal Radius No.7 . The regulator was extremely dirty and without the control wheel and connecting rod . I was sure the rod from an Optimus I had would fit, however it was of a smaller diameter. After looking in the reference library I am fairly sure the burner is of the 10\36 type. As can be seen, the stove has an Optimus tank filler cap and was a leg short of a tripod. There were two Radius outer burner caps in the box . I used the one which most resembled the example illustrated in the 1930’s catalogue as fitting the 10/36 burner. I cleaned up the burner (first time I’ve had a go at a regulator type) . Cleaned out the tank, new pip in the NRV , pump leather . Soldered on a leg that was at the bottom of the box . I would like to unashamedly nominate the «Heath Robinson « regulator to the fettling masterclass section . To my delight the stove fired up and functioned fine . Had great fun with this stove . One down , three to go
Got three of the four stoves working well . The fourth is an old Radius with several tank leaks and a dodgey burner , will put that one on the «rainy day list» .