This is a magnificent picture
Does anyone have the story behind it?
Some of the "Panel Wipes" are high in aromatic content - and sluggish in the primus 71 and friends.
Might be worth a shot.
Saw a really neat gimballed stove on a Dragon.
A primus No 1 in a fire buckect with a hole cut for access to the pump/pressure relief - the whole...
Hey, thems is all over the plaice now.... there's even one just down the road from me.
I've heard of it and indeed asked the same q. - Found a supplier up near Fyldefox but nobody near here (yet?) - looks like a much better bet than...
Nope, I just bent the buggars to fit - 4mm steel rod.
See This Thread.
Sort of worked - but not great, and not so stable as the original - I suspect that you'd have to work hard to make a real...
Half an Optimus 00 in a rusty tin with two prickers.
The flame ring is missing - might be running a little rich (nipple hole enlarged) but I'd try the flame ring first.
Is the whole Stove Primus or is it Primus burners and an Aussie stove body?
Any close-up shots?
One of the tricky points is that "Primus" is,...
I made one last week from some lead "flashing" - that's lead sheet about 2mm (bit more that a sixteenth) thick. - seems to work fine.
Thanks, Ian - I knew I'd seen one but could not think where.
Today I received a Primus 2251- in good order with box and instructions - in the mail from Ebay.....
Its in nice order and contains the...
Has anyone got a picture of the standard stove for the mini-transat nutters?
Looks like an epi micro welded to the underside of a kettle.
"Hard Man" goes backpacking.
Its the modern replacement for asbestos...
I've used PTFE tape for that junction - worked fine.
George, I asked some friends for a figurative translation and got this:
Its all grist to the mill.
Separate names with a comma.