@Mlo86 I can honestly say I have never had the issues you are having with any of my Nova stoves. I think a short video would be helpful....
@Arvadaman Thanks for sharing.
Nice photo-illustration @Doc Mark Mike
@JohnL The answer to you last question about converting the stove to an A version would be no, unless you also replace the regulator as the...
@olive Did you mean the Omnilite Ti or the Omni-Fuel II? I do not see a Titanium Omni-Fuel listed on their website although I have seen...
@olive I have 1 3288 (Multifuel) and 1 3289 (Omnifuel) from 21012003 and 18032003 respectively with metal pumps. My next omni-fuel is from...
I get mine from Shapeway's
@Horses and Mules Welcome to CSS. How new is your fuel? White gas should never run rich unless of course you were using the 45 jet. The...
@Oksen I removed the large screen from the inside of mine and the flames are much prettier.
+1 :thumbup::thumbup::thumbup:
Where is it leaking, the valve, or gasket?
@Ouss The label was a reproduction from quietstove and was actually smaller than original. As far as I know they are no longer being made
@SistersOregon I have a small bag full of those springs, and some flint. I have the whole assembly but I'm not sure it will have the correct...
Impressive Flame for an 82 year old stove.
@Doc Mark I have a few of those from my "I did not know any better propane days". Just kidding they are actually pretty good stoves with one...
@Brad Mugleston Pots are kind of a personal thing. I prefer to use heat exchanger pots from Optimus and Primus. Some will work with the 400/508...
@Brad Mugleston It's also harder for you to see the flames in direct sunlight so I would suggest early morning or after sunset. Mike
@Brad Mugleston If it sprays out I would say you are good. If it was more of a stream I'd say not enough air. It is also possible to flood...
@skorpiius None of the cracks have reappeared or new cracks developed. I recently glued 2 more pumps. I will also point out none that I've...
@Brad Mugleston Welcome to CSS. I have a 508 stove that refuses to light correctly according the instructions and usually floods, at which point...
Separate names with a comma.
