Hi @kerophile when putting the stove out the outer cap stayed that red for 3 seconds so I quickly snapped a pic.
I'm glad now that I did and...
All I can say is it was worth the wait on the last few parts.
Absolutely delighted with it and the flame noise and smell.
Thank you to all who...
I'm interested to see all types for all stoves @snwcmpr
Post what you've made.
Great thanks @kerophile some great reading for me later.
Was actually thinking something along the lines of a food tin. I like the hinged one...
Mostly an Optimus /Primus stove Tony
Has anyone made their own pickers and wind shields.
I'd be interested to know and see as I'm thinking I'd making one of each
Can't beat some Makita tools in the workshop
Wrap it up with masking tape. Protects the cylinder housing and gives a better center to installing nrv
Yea I left it as parts are to hard to get over here at the minute. Enjoy!
Thanks to you @kerophile and @Firestarter for all the help and links!
I've enjoyed taking this stove which has been in my family back to its...
Didn't have time until today to get the legs soldered on. Cheers for all the advice and tips I used the toothpaste approach and it worked a treat....
I used a 2.5mm cast iron stick recently that was very nice to cold weld with. I'll try find out the brand and let you know regardless.
It works though that's the main thing. These stoves are hardy machines given they are all made of brass.
I'm practically taking one from the...
What's annoying you the most about it @Jesse ? The look of it or the worry if you used it something may break?
I've repaired cast on a few...
Great advice and tips there Kerophile thanks. I've yet to tackle the legs will be this evening or tomorrow evening.
Haha no I'm still here. Cheers Kerophile will have a read now.
Hi firestarter yes it's the type solder and flux that was used is what I'm wondering?
There's low and high temp sliver solder, plumbing solder...
Success this evening.
Originally I thought pipes might have got cracked due to an over tightening of the jet nipple. Not until a clean up prep...
Don't worry I'm not crazy, had to see where I was at with it and I'm glad I did fire it up.
As you can see I've two cracks. Small one under the...
Separate names with a comma.