1967 - Enders 9061

Discussion in 'Enders' started by HunterStovie, Nov 17, 2019.

  1. HunterStovie

    HunterStovie United States Subscriber

    Offline
    Joined:
    Mar 11, 2015
    Messages:
    691
    Location:
    Parker, Colorado, USA
    Here are some pictures of my Enders 9061 dated 1967.

    Side View 1.jpg Side View 2.jpg Label.jpg

    First light after replacing all of the gaskets. pips and a well oiled pup cup.
    First Go.jpg Leaning Flame.jpg
    The flame is leaning a bit to the right and there's a bit of liftoff on the left. I also spent the next 30 minutes tightening the valve packing, relighting, testing and more tightening.

    In the next shots I cleaned the jet and burner assembly, much better. After a few minutes the flame calmed down a bit
    Go No2.jpg High Flame.jpg Low Flame.jpg

    The stove came with some spare parts which I will include later after I clean them up a bit.
     
  2. Harder D. Soerensen

    Harder D. Soerensen Denmark Subscriber

    Offline
    Joined:
    Oct 24, 2017
    Messages:
    969
    Location:
    Denmark
    Looks great - its a (complicated) workhorse.
    And the burner bell fits both an Optimus 8R and similar and the French Vesta stove as well.