DIYS NRV Tool

Discussion in 'Fettling Forum' started by Doug L, Nov 19, 2019.

  1. Doug L

    Doug L Subscriber

    Offline
    Joined:
    Oct 1, 2010
    Messages:
    1,022
    Location:
    USA
    I needed a NRV tool with a open slot so I came up with this idea.
    Its a 1/2 inch extension rod from a ratchet set clamped in a machinist vice.
    You need a drill press with a 1/4 inch cutoff wheel clamped into the chuck.
    That's all you need. Just slowly pull the part into the wheel and cut yourself a NRV tool.
    1.jpg 2.jpg 3.jpg 4.jpg
     
  2. ROBBO55

    ROBBO55 Subscriber

    Online
    Joined:
    Oct 27, 2014
    Messages:
    915
    Location:
    Somersby, New South Wales, Australia
    Worked nicely Doug. :thumbup:
    I also like to use a ratchet (and socket ) with my DIY - NRV tools.