How to replace the srv seal?

Hello all, this is my first post here. I recently bought an Optimus 8R gasoline stove off of eBay and the fuel cap seal and the safety release valve is leaking when I perform a dunk test. stove works somewhat but takes a long time to come to full output. I had an Optimus 99 many years ago and it would start up relatively quickly. Is there a Guide for replacing said srv seal?

 

@rchilso

You’ll need a “penta” tool (or make one) for dismantling the NRV.

This is a different stove, but the NRV is the same. If you scroll down it shows the dismantling of the NRV:

SVEA 123R Disassembly

Cheers

Tony

 

Welcome one to CCS
Here is where you can buy it on this page.
Svea 123/123R filler cap seal & safety valve pip. - The Fettlebox

 

Thanks to all. Will have this beauty running like new in no time.

 

I will post pix as soon as the parts arrive and I can get them installed. I can't wait! Thanks to all.

 

Ok so I had to engineer my own packing washer but all is well in Ringgold.

 

An excellent flame indeed.

 

What Ed said.

 

Now it's time to get started on the case. Looking for proper color. I think I'm going to use stove or automotive engine paint for the temperature tolerance. What do y'all think about gun blueing. Lol

 

WoW
Well done, look good

 

Repainting 2-111B's and 1-8R