MOHA No1

Discussion in 'Stove Forum' started by Tom Pedersen, Jan 26, 2021.

  1. Tom Pedersen

    Tom Pedersen Denmark Subscriber

    Offline
    Joined:
    Nov 10, 2019
    Messages:
    91
    Location:
    Denmark
    Hey.
    Got this MOHA No1 stove that I am trying to fettle.
    Under the tank there is Germany.
    It could be fun if there is someone who could tell a little about the stove.
    There is no valve at the bottom of the pump tube,
    but only a 3.5 mm hole.

    IMG_20210126_183941.jpg IMG_20210126_183929.jpg IMG_20210126_181755.jpg IMG_20210126_183906.jpg IMG_20210126_183847.jpg
    This part with an NRV sat soldered inside the tank, and stuck out at the filler cap, Have never seen it before on a stove. There may be someone who thought it should be sitting there.

    Tom
     
  2. igh371

    igh371 SotM Winner Subscriber

    Offline
    Joined:
    Jun 23, 2013
    Messages:
    1,694
    Location:
    Durham
  3. ROBBO55

    ROBBO55 Subscriber

    Offline
    Joined:
    Oct 27, 2014
    Messages:
    1,322
    Location:
    Somersby, New South Wales, Australia
    It will be a fun time fettling this one. :-k
     
  4. Tom Pedersen

    Tom Pedersen Denmark Subscriber

    Offline
    Joined:
    Nov 10, 2019
    Messages:
    91
    Location:
    Denmark
    Just a few pictures
    Then it manages to get the MOHA up and running after removing and soldering the pump pipe.
    The NRV which is soldered to the end of the pump pipe had also come loose.
    Tom

    IMG_20210130_134413.jpg IMG_20210130_134327.jpg IMG_20210130_134502.jpg
     
  5. ROBBO55

    ROBBO55 Subscriber

    Offline
    Joined:
    Oct 27, 2014
    Messages:
    1,322
    Location:
    Somersby, New South Wales, Australia
    Nice work, Tom. Congratulations :thumbup:
     
  6. Tom Pedersen

    Tom Pedersen Denmark Subscriber

    Offline
    Joined:
    Nov 10, 2019
    Messages:
    91
    Location:
    Denmark
    Here is a picture of the MOHA plastered and finished.

    Tom
    IMG_20210131_100620.jpg