my optimus 8r clone pt1 have a problem .need help

Discussion in 'Stove Forum' started by xu pu, Feb 16, 2020.

  1. xu pu

    xu pu Japan Subscriber

    Offline
    Joined:
    Feb 1, 2020
    Messages:
    10
    Location:
    中国陕西省西安市
    8E057898-B015-4F92-A182-E4F3991F4911.jpeg There's an extra flame,I tried to replace the jet,but still not normal
     
  2. xu pu

    xu pu Japan Subscriber

    Offline
    Joined:
    Feb 1, 2020
    Messages:
    10
    Location:
    中国陕西省西安市
  3. xu pu

    xu pu Japan Subscriber

    Offline
    Joined:
    Feb 1, 2020
    Messages:
    10
    Location:
    中国陕西省西安市
  4. snwcmpr

    snwcmpr Subscriber

    Offline
    Joined:
    Nov 16, 2011
    Messages:
    13,573
    Location:
    North Carolina
    Is the jet seated properly?
    Is there a crack where the jet seats?
     
  5. presscall

    presscall United Kingdom SotM Winner SotY Winner Subscriber

    Offline
    Joined:
    Aug 25, 2009
    Messages:
    9,113
    @xu pu
    I agree with @snwcmpr about the jet threads not maintaining a seal - or damage.

    A little graphite grease smeared on the threads of the jet before installing it can help the jet create a seal.
     
  6. hikerduane

    hikerduane Subscriber

    Offline
    Joined:
    Mar 1, 2010
    Messages:
    6,168
    Never replaced the jet in my two, but threads may be different from Swedish stove jets, as fuel caps are not interchangeable with Swedish stoves.
    Duane
     
  7. xu pu

    xu pu Japan Subscriber

    Offline
    Joined:
    Feb 1, 2020
    Messages:
    10
    Location:
    中国陕西省西安市
    yesj.it is different
     
  8. xu pu

    xu pu Japan Subscriber

    Offline
    Joined:
    Feb 1, 2020
    Messages:
    10
    Location:
    中国陕西省西安市
    i has buy graphite grease,i will try it
     
  9. xu pu

    xu pu Japan Subscriber

    Offline
    Joined:
    Feb 1, 2020
    Messages:
    10
    Location:
    中国陕西省西安市
    我使用 石墨润滑脂。I have solved the problem
     

    Attached Files:

  10. Twoberth

    Twoberth United Kingdom Subscriber

    Offline
    Joined:
    Feb 21, 2017
    Messages:
    586
    Location:
    England
    Good job, and great photo.