New nipples - jets - required

Discussion in 'Stove Forum' started by Paul Aslanides, May 6, 2021.

  1. Paul Aslanides Australia

    Offline
    Joined:
    Feb 9, 2020
    Messages:
    54
    Location:
    Melbourne
    Hi All. I'm desperate to find at least two new jets -
    One for a small, half pint RM or Veritas stove ( with folding legs & pack away tin)
    Size of the old worn jet thread is 4.5 x 0.5 m/m pitch. ( 0.175" x 0.197 ").
    I have new stove jets of 0.170" x 0.197", but the five thou difference means that it sprays kero out past the threads in all directions. And no, I would very much prefer not to use muffler goo or such to seal the thread. Also need a travelling stopper for the centre in the fount.
    Oh dear, also need a flame spreader, slightly smaller than the standard size for the Primus, Svea, etc. stoves.

    The other nipple is for the Monitor 26 Blow torch. Thread size is 1/4" x 32, I think, from memory. The current jet is so well worn that the front of the torch glows red hot, so much fuel to burn. Any pointers, links, jet size info. would be much appreciated. Thanks.
     
  2. hikerduane

    hikerduane Subscriber

    Offline
    Joined:
    Mar 1, 2010
    Messages:
    7,025
    Try Base Camp in the UK.
    Duane
     
  3. CW

    CW United States Subscriber

    Offline
    Joined:
    Dec 19, 2016
    Messages:
    457
  4. Paul Aslanides Australia

    Offline
    Joined:
    Feb 9, 2020
    Messages:
    54
    Location:
    Melbourne
    Thanks, gentlemen. Much appreciated.