Optimus 11

Discussion in 'Optimus No:11' started by richmay, Sep 7, 2016.

  1. richmay

    richmay SotM Winner Subscriber

    Offline
    Joined:
    Jul 6, 2013
    Messages:
    194
    Embossed case

    OP 11 001.jpg

    The burner cleaned

    OP 11 002.jpg

    The curved pipe from the tank direct to the burner and not the valve body

    OP 11 003.jpg

    Pump and SRV

    OP 11 004.jpg
    Control handle which i believe to be the wrong one for this stove

    OP 11 005.jpg


    OP 11 006.jpg

    Difference in style of handles between this and a later OP 111B

    OP 11 007.jpg

    Difference between the style of case hinges and the position of the tool clips
    OP 11 009.jpg

    Difference between the style of tank and heat shield
    OP 11 010.jpg
     
  2. Big Si

    Big Si Subscriber

    Offline
    Joined:
    Feb 3, 2008
    Messages:
    1,028
    Looks really nice, how did you get the burner so shinney?

    Si
     
  3. richmay

    richmay SotM Winner Subscriber

    Offline
    Joined:
    Jul 6, 2013
    Messages:
    194
    @Big Si

    Citric acid, washing up liquid, warm water and a ultrasonic cleaner to take the worst off then scotchpad, elbow grease and the odd small hard bristle brush, i over done the acid on the flame ring as it has turned pink in places, just some thing to watch for

    Best Regards
    Richard