Recognition

Discussion in 'Stove Forum' started by ton visser, Oct 11, 2019.

  1. ton visser

    ton visser Subscriber

    Offline
    Joined:
    Jan 6, 2016
    Messages:
    94
    Location:
    Wormer, Holland
    Hi, someone gave me a box with some parts.
    I would be much obliged if I could find the next answer, on what stove or stoves should those parts must be used?

    The first one is a burner:

    It has a fixed pre heating cup and holes on the pipe for the inner cap.
    As you can see made in sweden

    vraag1.JPG

    vraag2.JPG

    The second part is a inner cap with holes in it:

    vraag3.JPG

    Thanks for help,

    Regards,

    Ton.
     
  2. trebor

    Offline
    Joined:
    Oct 17, 2014
    Messages:
    52
    Optimus 205 burner.
     
  3. ton visser

    ton visser Subscriber

    Offline
    Joined:
    Jan 6, 2016
    Messages:
    94
    Location:
    Wormer, Holland
    Ok trebor, both the burner and inner cup?
    And on what stove was it used?

    Regards,

    Ton.
     
  4. trebor

    Offline
    Joined:
    Oct 17, 2014
    Messages:
    52
    This burner is from the 1980s and it's was for Optimus no5.
    image_2019-10-11_16-57.jpg
     
  5. ton visser

    ton visser Subscriber

    Offline
    Joined:
    Jan 6, 2016
    Messages:
    94
    Location:
    Wormer, Holland
    Ok, but this pre heater cup seems to be fixed with soldering, not original maybe?
    And the innercup with holes on top?
     
  6. trebor

    Offline
    Joined:
    Oct 17, 2014
    Messages:
    52
    The inner cup is optimus part no 2180. Used on other Optimus burners from 1980s up to the Hiker + (model 88).
     
  7. Lennart F Sweden

    Offline
    Joined:
    Jun 24, 2017
    Messages:
    591
    Location:
    Vänersborg, Sweden
    The inner cup is made for use with the burners with inner tube holes like yours but could as well be used on the regular silent burners, it is a common late replacement on many silent stoves and the burner is often found as replacement for old worn out roarers.
     
  8. kerophile

    kerophile United Kingdom SotM Winner Subscriber

    Online
    Joined:
    Sep 23, 2004
    Messages:
    11,298
    Location:
    Far North of Scotland
    Hi @ton visser :

    "However, you will also note from the photos that there are some other small differences, for example, the inner silent cap of the Primus regulated burner has holes on top.There are also holes in the centre up-stand of the corresponding silent burner body.
    I believe this to be subject of a Primus patent, claimed to prevent or reduce the incidence of under-burn."

    from this old thread:

    regulated-burners-i-have-known.8449

    Best Regards,
    Kerophile.
     
  9. Doc Mark

    Doc Mark Subscriber

    Offline
    Joined:
    Dec 12, 2004
    Messages:
    16,840
    @ton visser ,

    Yes, it appears that someone soldered the spirit cup to the burner setup. You do have proper inner cap but now need the matching outer cap, so that your burner can actually work. Here's a photo of such a cap, just FYI:

    DSCN5782.jpg

    Please read all the good stuff that @kerophile has shared. You will learn a ton!! Good luck, and God Bless!

    Every Good Wish,
    Doc
     
  10. ton visser

    ton visser Subscriber

    Offline
    Joined:
    Jan 6, 2016
    Messages:
    94
    Location:
    Wormer, Holland
    Thanks for all the input an yes, I have a lot to read.

    Regards,

    Ton.