Hi Colin, Looking good! That looks to be full throttle, but you can get a full range of power settings from this stove: https://classiccampstoves.com/threads/1996-british-army-no-12.16802/#post-169819 I take it you are using paraffin? Best Regards, Kerophile.
Hi Kerophile, yes I'm running kerosene and burns well throughout the range but does burn slightly lop sided. Colin
@Highlandtrooper This might not be what's making your flame lopsided, but two days ago I noticed that my Hipolito fitted with a silent burner was producing a flame like yours. After pondering for a while, and making sure the caps were seated properly, I found that the nipple needed tightening a bit. That immediately fixed the problem. Sometimes you get lopsided flame if there's a bit of crud or damage in the jet. Cheers Tony
@Tony Press I'm supposing it's the Radius you made reference to in my post on an Optimus 80 repair? There was some discussion on 'screw in' or 'brazed' burner stem to tank joint. The outcome's obviously a success but hopefully you've a follow-up fettling post in the making? John
@presscall Yes! A full fettle-post tomorrow linking the various threads of this saga. Thank you for giving me the courage to take it on. Cheers Tony
Snow Peak GigaPower WG stove, Coleman Fyrestorm Ti inverted canister adapter and hose. Followed by bouncing camera.
Just started working on this one. Someone painted it red. Gotta get model number off it and do some obvious cleaning, but she's coming along. All 3 burners humming.
Early KampKook first lighting after an overhaul. Tough to see, but got all three burners lighting. Having a reverse pressure problem with pump to work through.
Flame shot of my first Franky.Going to be fitting the pot support in a few days.It's half Coleman 220 lantern and half Coleman 530 pocket stove.
