Hi Hikerduane, Thank you ! I will try and spread the pump cup some more and see if it helps. At this stage i think i'll try and get a...
Hi all, i'm having another go at fettling my primus 41. I managed to find a tank cap off a primus 624 blowtorch (one with the wings), that being...
Success !! I managed to get the pump out with boiling water, thank you for the tip ! Much appreciated. Should i look into replacing the NRV seals...
@igh371 Thanks Ian!! Much appreciated for your help, how do I figure out what the new number is for future reference?
@Tony Press I definitely need a tank cap (2041). I need to pull the stove down more and work out what else I need. The jet is banged up a bit and...
@presscall @igh371 Thank you for the images and help ! Much appreciated. I think the primus #100 cap is the best option at the moment. I have had...
Hi John ! Thank you for your help much appreciated. I think a few images you tried to attach didn't work.
Thank you ! The word "Primus" grabbed my attention :D. Was very surprised to find it to be honest, not much usually comes up at the flea market...
Hi All, I recently acquired a Primus no41 from the local flea market. From the markings on the tank I believe it’s from 1954. I'm missing the...
I have had the same experience with an Omnilite Ti. Removing the metal clip / cleaning and regreasing worked for me too !
Hi CCS, I am looking at finding a wok burner and was looking at the BRS-7 as an option. I am concerned that the priming pad is asbestos instead...
I have solved the stove not shutting off problem, i adjusted the pricker :). I will do a hot water test too when i get some more time !! Thank you...
Hi JP2, Thank you for your help and advice ! Much appreciated, i will try with my hands first. :)
Hi all, I just picked up an aluminium Sigg-Tourist cookset with a SVEA 123R. The Sigg has seen some use and some steel wool thats for sure....
Thanks, would carbon felt be able to do the same thing for the priming cup ??
Does anyone have any tips for running the stove in sub-zero temperatures. There is also a small flame coming from the fuel valve spindle, how do i...
Thanks guys for all your help, i have made some more head way with the functionality of the stove. I have run the stove for about 30 min straight...
New Steel Wool, ahh makes sense now :P On the fuel valve which way is off and on? As the stove always has white gas (shellite in aus) leaking...
Thanks Sparky :). I will bend the tabs on the spreader and have a look at the jet. Ahhh ok know i understand what you mean by brass turning...
Ahhh thats why it was yellow, i will look at the jet when i get some free time :) Had a bit of trouble trying to get it to light (wasn't sure...
Separera namn med ett kommatecken.
