Chinese coil alcohol stove

Diskussion i 'Stove Forum' startad av hikerduane, 29 mars 2024.

  1. hikerduane

    hikerduane Subscriber

    Offline
    Blev medlem:
    1 mars 2010
    Inlägg:
    10.875
    Från:
    Plumas County, CA
    Very surprised how big this is and very sturdy, not a cheap stove. Surgical tubing it feels like for the fuel line to the stove. Much of the line could be cut off and used if/when the original section gets brittle or cracked. Takes a bit to shut down, guess the fuel path is lengthy. Has quite a tall flame, nice blue color close to the burner. Not a lightweight option for a backpack stove, another toy.
    Stove and hoses, valve, pump weigh:
    16.8oz./477grams
    Fuel bottle:
    4.25oz./121grams
    Since it is slow to get to a simmering flame, takes a few minutes, initially when turning down was similar to the simmer of a small isobutane stove. Flame is centered, so only the middle shows any action.
    Duane
    20240329_154842.jpg
    20240329_154856.jpg
    20240329_154856.jpg 20240329_154903.jpg
    20240329_155505.jpg
    20240329_155717.jpg
    20240329_160040.jpg
    20240329_160228.jpg
     
  2. hikerduane

    hikerduane Subscriber

    Offline
    Blev medlem:
    1 mars 2010
    Inlägg:
    10.875
    Från:
    Plumas County, CA
    Tinkered some more this morning. Understanding functions today. Black bulb with screw, screwed in adds pressure and holds it, I thought it needed the screw opened to add pressure, but always heard air escaping. Valve in middle of hose shuts stove down so pressure in fuel bottle can be kept. Screw on bulb regulates flame better and faster as you add or release pressure by unscrewing it. Pressurized fuel bottle with less pressure this morning and can get a fairly decent blue flame now. Running this, the flame isn't real consistent as you can hear the flame rise and fall a tiny bit. Liking this better this morning.
    Duane
    20240330_093823.jpg
    20240330_092927.jpg
    20240330_094014.jpg
    20240330_094123.jpg
     
  3. Twoberth

    Twoberth United Kingdom SotM Winner Subscriber

    Offline
    Blev medlem:
    21 februari 2017
    Inlägg:
    1.846
    Från:
    England
    Very interesting. Thank you for posting.
     
  4. orsoorso

    orsoorso Subscriber

    Offline
    Blev medlem:
    30 mars 2011
    Inlägg:
    579
    serch in this site for "not a frankie", there I postred this"i got it, not really an arsionist tool (at list, not only:mrgreen:) 1 liter water boils 3 minutes and 40 seconds burning 35 grams od denaturized alcohol (10% water)
    seriosly it is better then what it could seem, only attention is not to pressurize too much, but the burner noise dramatically chenging will advise you.
     
  5. snwcmpr

    snwcmpr SotM Winner Subscriber

    Offline
    Blev medlem:
    16 november 2011
    Inlägg:
    22.124
    Från:
    North Carolina
  6. hikerduane

    hikerduane Subscriber

    Offline
    Blev medlem:
    1 mars 2010
    Inlägg:
    10.875
    Från:
    Plumas County, CA
    I’m replacing the valve that is midway on the hose, a CCF member pointed out that the valve was for air. Ordered a small, fuel rated valve. The coil is made from copper, so when tinkering with the stove, the coil is easily moved out of position.
    I’m a little disappointed as I thought the stove would be much smaller, similar to a MSR WL or X-GK.
    Being an alcohol stove, it does suck down the fuel.
    Duane
     
  7. Remus1956

    Remus1956 United States SotM Winner Subscriber

    Offline
    Blev medlem:
    5 september 2013
    Inlägg:
    1.972
    Från:
    Los Angeles California
    Almost looks like it would run on gravity....interesting