Hank Roberts conversion

Diskussion i 'Fettling Forum' startad av Rdug113, 18 oktober 2014.

  1. Rdug113

    Offline
    Blev medlem:
    3 augusti 2012
    Inlägg:
    79
    I bought this kit which worked great. It was only $8.01 with free shipping.
    i 1413649383-image.jpg then i found this one which has an extra adapter for screw on cans. 1413649410-image.jpg 1413649441-image.jpg 1413649454-image.jpg 1413649472-image.jpg
    It was 3 times the cost but had an extra adapter for screw on flat cans. Everything still fits inside. The hose from second kit will replace the hose on my firefly. Mandatory flame shots after sundown.
     
    Last edited by a moderator: 26 juni 2015
  2. OMC

    OMC United States Subscriber

    Offline
    Blev medlem:
    13 september 2013
    Inlägg:
    5.769
    Från:
    ILLINOIS, USA
    Thank you for sharing. In image 1 I see an adapter, in image 2 I see an additional adapter, ok.
    The brass adapter in image 4, is that home made or part of the 2nd kit?
    ALSO anyone w/a Hank Roberts will be asking
    can you help us by pointing WHERE to look for that 2nd adapter kit?
    thx
     
  3. Doc Mark

    Doc Mark SotM Winner Subscriber

    Offline
    Blev medlem:
    12 december 2004
    Inlägg:
    19.660
    Från:
    So. California Mountains
    Greetings, Gentlemen and Ladies,

    Check these two links for a very nice, and very workable DIY Hank Roberts conversion. Ian and Chuck both wrote this procedure up, and after you read what they both had to say, you can easily accomplish this task, and get your Hank Roberts stoves and lanterns up and running again!!

    https://classiccampstoves.com/posts/1124

    http://www.cl

    Hope that helps, and God Bless!

    Every Good Wish,
    Doc
     
    Last edited by a moderator: 1 juli 2015
  4. Rdug113

    Offline
    Blev medlem:
    3 augusti 2012
    Inlägg:
    79
    They were both on that evil auction site. The second one is a "bsr1 multi use fuel adapter" . The first one was a no name. The hoses have different seals to the the adapters, but are still inter-changable.
     
  5. Rdug113

    Offline
    Blev medlem:
    3 augusti 2012
    Inlägg:
    79
    1413662271-image.jpg
    After cutting the nipple, drill it out. First w/ a 1/16 bit then 1/8. Slip the hr nipple into the drilled kit nipple and solder. Don't forget to check for leaks before firing up your completed conversion.

    OMC, the second link in doc's post is how i did my conversion.
     
    Last edited by a moderator: 26 juni 2015
  6. Rdug113

    Offline
    Blev medlem:
    3 augusti 2012
    Inlägg:
    79
    1413671436-image.jpg 1413671449-image.jpg As promised- flames! First on coleman butane, second on primus gas propane iso butane.
     
    Last edited by a moderator: 26 juni 2015
  7. OMC

    OMC United States Subscriber

    Offline
    Blev medlem:
    13 september 2013
    Inlägg:
    5.769
    Från:
    ILLINOIS, USA
    thank you that was great.
    if anyone's looking, it's there
    brs 1 (not bsr1) and use *seller spelling of adaptor. So search
    brs 1 multi-use gas adaptor
    to get there.
    *china seller bluemoon200510.

    I have to dig out the last kit I bought and look it over again to compare, (what was delivered was not what pic in ad showed). Then I think I will end up buying this kit.
    Seller has quite a bit of outdoor sports items including SS kettles I've not seen before, stoves and adapters... may be worth a look fellow stovies. thx again.
     
  8. Rdug113

    Offline
    Blev medlem:
    3 augusti 2012
    Inlägg:
    79
    Sorry about the spelling- had a senior moment while typing.
     
  9. kerry460

    kerry460 Australia R.I.P.

    Offline
    Blev medlem:
    20 augusti 2010
    Inlägg:
    2.357
    I do not know if this is of help.
    there is an adaptor to go from the coleman can fitting to the disposable butane cartridges .(the cheap ones ).
    cheers,
    kerry
     
  10. jbf

    Offline
    Blev medlem:
    23 mars 2012
    Inlägg:
    252
    I plan to go Ians route with the stove as it is about 16$ and have adapter to go to cans
    save 10$ on shipping/
    :D my 2 cents
    john