Thanks folks! Sent a note to Base Camp too. Haven't heard back from anybody yet...
I picked up a couple brass stoves the other day, one of them is bigger than any I've seen before. It appears to be a Svea #2[ATTACH] Shown here...
You're right, I confused A and D. Here's the stuff I've been using: https://www.mcmaster.com/#8635K904 Again it works just fine with kerosene but...
Working from memory the buna-n stuff I've been using is about 40d, the viton I've been able to find is around 70. The harder stuff will work if...
Thanks gents, seems as though I have the right equipment, I'm glad I didn't go to extremes and damage something before I consulted here. I also...
How tight is the outer burner supposed to be to the inner one? Mine is very loose, probably 1/16" gap. The outer cap is literally only held on by...
I've got a sheet of Buna-N I use for making check valve pips, I got it from McMaster-Carr, it was expensive but the sheet will make hundreds of...
Oh geez, say it ain't so! ;) I've even sold a stove, not just once but twice. Of course I haven't shipped the second one... Actually I'm not a...
Thanks Martin, thats super cool. This is my first foray into these stoves, I've got a Primus regulated lined up next...
I know the bb dance well, I've also got a handful of sheet metal screws I toss in on the theory that the sharp points will dislodge crud... More...
Thanks Alex, I had more or less figured the orientation it was how the cap stayed on the eluded me. I'd seen some pictures with a piece of wire...
Folks, I've got a lot of experience with Coleman stuff but I've never worked on a Swedish stove before. I've got what I think is a Svea Companion...
Skill mellom flere navn med komma.
