I ended up getting a new spindle and that pretty much fixed it. It does candle for a few seconds after shutting off, as the previous commenter...
Hmmm. The candling is coming from the jet. I have tried 3, 4, and 5 clicks on the needle setting, repeatedly. The cone on the spindle is smooth,...
Thanks! Okay the curved face of the washer now faces the grapite packing. I'm not seeing a leak from the vaporizer at the packing nut. I can light...
Oh okay. I might need to add some more. That’s helpful about the threads!
I guess I’ll just do it over and see what happens. Wish there was a good video showing what to do! Thanks!!!
The tiny washer goes on first and with the indented side leading, right? And the flat side toward the packing?
Yes using graphite tape or foil purchased on EBay as part of a rebuild kit. I cut a strip about 1/8 inch wide and wrapped it around the spindle. I...
Okay. I think I’m almost done but I have gotten this graphite packing nut thing correct. I can’t find any videos showing how this is done. Can...
Thanks for all the suggestions! I finally got it loose but had to resort to the oil filter wrench after days of soaking and heating. I was very...
Indeed! I made a penta tool out of an old tent stake. Took awhile to file it by hand. But it worked! Thanks! I’m sure I will need more help. Still...
Thanks everyone. I also can’t figure out how to get the penta wrench one needs to replace the pip seal in the SRV cap. I’ve seen mention of filing...
I want to remove it to check the wick because it seems as though the fuel is not flowing properly. I am getting a lot of sooting and yellow...
Good idea about the oil filter wrench. I wonder if I still have one? I will try the soaking approach. Thanks.
Perhaps. I don't know so well what the parts are called. I was going by what someone in a YouTube video called it. But yes, vaporizer it is!
Yes I have removed those parts. They came off easily. Here’s a photo.
I am trying to rebuild an old SVEA 123R (made in Sweden) stove. I cannot get the spindle removed from the tank. I have tried WD-40 and heating...
Skill mellom flere navn med komma.
