I am registered to the forum already.
Thanks for the advice. I will start using the stove without the needle. And thanks a lot for the link to the "Regulated burner cutaway". That link...
I removed the spindle. Now it was easy remove the needle. Now I have to mount the needle correctly.
Thanks a lot
Thanks for the answer. A photo of what? I posted previously a photo of the burner after turning the wheel maximum to the left. Exactly what do you...
Oh, so the teeth should face the tank. Another member of CCS refused to tell me how I should place the needle, so maybe I placed it wrongly. I...
I have turned the wheel fully to the left
Yes, I've removed the jet. But the needle is stuck. When I turn the wheel to the left the needle becomes visible, but I can't remove it.
Yes, I am.
I placed the needle in the hole with the help of a pencils eraser and screwed the jet in place. When I turned the wheel to the left the needle...
Thanks!
Is it not more convenient for me if you just tell me eg "the cogs should be against the fuel tank"?
Yes, but they say "put the cogs against the cogs of the spindle". The problem is I don't know which direction that is.
But in which direction should the cogs be placed? Against the fuel tank or the opposite?
Thanks for the answer. I am not sure how I should turn the needle to place it correctly.
When I opened the box with the Optimus today I discovered a leak of kerosene. It seems to come from the jet. When I used the stove and wanted to...
The stove is working now. ( I failed to upload a photo. )
Yes, they have. Thanks a lot for all the help I've received from you. It's appreciated.
Another problem: there's no inner cap with the stove I bought. I only have the outer cap. It's necessary to have an inner cap?
Is it necessary to screw it? I don't have any adapters for that.
Skill mellom flere navn med komma.
