Coleman 425E

Discussion in 'Fettling Forum' started by Runegutt, Dec 21, 2005.

  1. Runegutt

    Offline
    Joined:
    Jan 17, 2005
    Messages:
    1,031
    Have cleaned my 425E. Its a nice stove, but there is something i do not understand.
    That little handle on the tank ( up for lighting, down when burning) what does it actually do?
    I can se that something happends when its up, but what?

    Thank you
    Rune
     
  2. Nordicthug

    Nordicthug R.I.P.

    Offline
    Joined:
    Oct 31, 2004
    Messages:
    3,967
    It's a cleaning needle control for the jet. I spin it two or three times on mine after the stove is lit, then leave it pointing down.

    Gerry
     
  3. Runegutt

    Offline
    Joined:
    Jan 17, 2005
    Messages:
    1,031
    I cant see much movement on the needle, but I can hearand see some change in the flame.
    The stove burnes much brighter when the handle is up in lighting position.
    Thank you
    Rune
     
  4. Canadian Burner

    Offline
    Joined:
    Sep 7, 2005
    Messages:
    493
    I believe it also changes on how the fuel is drawn. In the up position it draws vapours from the top of the tank as well some of the liquid fuel to make it easy to light. In the down position, it should draw just liquid from the bottom of the fuel pick up tube. If you leave it up, the tank should lose pressure quickly.

    This is what I recall seeing when I took one like this apart a while ago. I may still have the valve assembly if you want pics of the set up. Feel free to correct me if I'm incorrect.

    CB
     
  5. Lance

    Lance Subscriber

    Offline
    Joined:
    Jul 25, 2004
    Messages:
    6,004
    Location:
    Northwestern Illinois
    the cleaning needle for a coleman two burner (suitcase) stove is attached to the valve wheel at the front of the fount. The little lever raises and lowers the fuel supply valve and the bottom of the fount. This valve is a spring loaded wire square on the end which when raised, lever end down, allows liquid fuel up to the valve with the cleaning needle attached. Lowering the fuel-air valve restricts the ammount of fuel going to the burner and will after a bit of time cause the stove to starve for fuel and the flame will go out.

    lance
     
  6. Runegutt

    Offline
    Joined:
    Jan 17, 2005
    Messages:
    1,031
    Thank you all for valuable information.

    I like this Coleman stoves a lot. Complete different stoves of what I am used to. Over here the Standard 41, and the 111 is the stove most people will recognise.

    Rune
     
  7. Lance

    Lance Subscriber

    Offline
    Joined:
    Jul 25, 2004
    Messages:
    6,004
    Location:
    Northwestern Illinois
    Rune, that stove is nearly indestructable so take care and it will too.

    lance
     
  8. Runegutt

    Offline
    Joined:
    Jan 17, 2005
    Messages:
    1,031
    I know.
    The box had some ugly dents, wich I have repaired with a big hammer.
    Nice American steel that box.

    Rune
     
  9. Lance

    Lance Subscriber

    Offline
    Joined:
    Jul 25, 2004
    Messages:
    6,004
    Location:
    Northwestern Illinois
    I'm sending Ted over to your place so he can wack on it like he did on his ERMA. :lol: :lol: :lol: :lol: :lol:

    lance
     
  10. usdan50

    usdan50 R.I.P.

    Offline
    Joined:
    Jul 25, 2004
    Messages:
    1,186
    Right on the money,That opens the air bleed so air can be drawn from the fount leaning the mixture. Dan
     
  11. grunter

    Offline
    Joined:
    Aug 24, 2004
    Messages:
    73
    Location:
    Cambridge, New Zealand
    Iv'e got a 425E too. My little handle doesn't seem to do anything when I turn it. I have always thought it was a cleaner too. The thing still goes well anyway!