Henrik's SRV testing adaptor

Discussion in 'Fettling Forum' started by Knight84, Sep 20, 2010.

  1. Knight84

    Offline
    Joined:
    Jan 21, 2009
    Messages:
    3,236
    I finally got around to posting this on here. Sorry

    Shortly after posting my testing on srv in this Post Henrik came up with the idea of making an adaptor for testing the release valve in the fuel caps.
    In my tests I used an old 8r tank. I never put the pressure above 60psi but it would be nice not to worry about the tank. The adaptor Henrik made takes the tank out of the tests.

    1284947335-100_0912_opt.jpg

    1284947366-100_0916_opt.jpg

    :mrgreen:

    Take a bow Henrik :D/ :clap: :clap: :clap:

    Best regards,
    Jeff
     
    Last edited by a moderator: Jul 1, 2015
    Knight84, Sep 20, 2010
    #1
  2. presscall

    presscall United Kingdom PotY Winner SotM Winner SotY Winner Subscriber

    Offline
    Joined:
    Aug 25, 2009
    Messages:
    13,872
    Location:
    Lancashire, United Kingdom
    Well I'll be blowed - so to speak.

    Nice one Henrik!

    John
     
    presscall, Sep 20, 2010
    #2

  3. Pitsligo

    Offline
    Joined:
    Jul 12, 2009
    Messages:
    485
    Location:
    Olympia, WA, USA
    Very cool!

    Where did you come up with a Whitworth thread adaptor for the cap? That's what's been foiling my efforts to build something like that (though not so nice).

    Alex
     
    Pitsligo, Sep 20, 2010
    #3

  4. -/-

    Offline
    Joined:
    Mar 3, 2010
    Messages:
    1,014
    Cut directly on the lathe
     
    Last edited by a moderator: Jul 2, 2015
    -/-, Sep 20, 2010
    #4