Optimus No 8 R

Discussion in 'Fettling Forum' started by Admin, Jan 29, 2012.

  1. Admin

    Admin Courtesy of Iani

    Offline
    Joined:
    Aug 22, 2008
    Messages:
    1,350
    A picture of before, and a few of after.

    As you can see, the before picture, the 8R was a hell of a mess.
    The Svea 12R has turned out very nice also.

    On all restorations of this type of stove, I use the Thermacure paint. Tried many of the colours, and all are good. Paint can be obtained off Ebay, link below :

    http://www.ebay.co.uk/itm/High-Temp...ial_Paint_Varnish_MJ&var=&hash=item68c75d84de

    You can also get the paint cheaper, if you phone the company direct, or go on their own website.

    1327853553-KGrHqJloE8DYi1bRBPBfCRQ60_1_opt.jpg 1327853603-IMG_3741_opt.jpg 1327853627-IMG_3744_opt.jpg 1327853646-IMG_3746_opt.jpg
     
    Last edited by a moderator: Jul 1, 2015
  2. DAVE GIBSON

    DAVE GIBSON Subscriber

    Offline
    Joined:
    Aug 6, 2004
    Messages:
    4,348
    thats one of the more impressive restore jobs i've seen here!!
     
  3. Samsvea

    Offline
    Joined:
    May 8, 2011
    Messages:
    20
    I take my hat off to you :thumbup: I saw these two for sale on ebay and though that they were only good for spares. Make me feel worse: let's see the Svea :clap:
     
  4. Tracer

    Tracer Subscriber

    Offline
    Joined:
    Jan 18, 2011
    Messages:
    283
    Thats a nice job!
    The burner looks like new. Is it? :lol:
    How long did it take to restore?
     
  5. Admin

    Admin Courtesy of Iani

    Offline
    Joined:
    Aug 22, 2008
    Messages:
    1,350
    Tracer

    No, the burners not new.
    Just had a good clean in Citric and Washing Powder.

    I suppose the total work time, was about three hours.

    Samsvea

    Never be put off what you see or hear.
    There was a British No 12, on the auction watch some time ago, it got a bit of a slagging off, because of its condition - nothing but a bit of elbow grease, couldn't put right.

    I'll put the Svea on soon.


    David

    Thanks
     
  6. Admin

    Admin Courtesy of Iani

    Offline
    Joined:
    Aug 22, 2008
    Messages:
    1,350
    Here you go Sam


    1327926450-IMG_3747_opt.jpg
     
    Last edited by a moderator: Jun 26, 2015
  7. Samsvea

    Offline
    Joined:
    May 8, 2011
    Messages:
    20
    This was what I was expecting given the 8R benchmark. :thumbup: Was this the citric acid and wall paper paste method and are you using polishing tools?
     
  8. Admin

    Admin Courtesy of Iani

    Offline
    Joined:
    Aug 22, 2008
    Messages:
    1,350
    Hi Sam

    I make up a solution of Citric Acid and Washing powder, 2 large dessert spoons of each.
    If it is a small item, like a burner head, spirit cups etc, I just throw them in a small stainless steel saucepan.
    If you are not used to using the solution, check on it fairly regularly, so you do not get pinking.

    At the moment, I am using Autosol, I am not using a buffer.

    For the larger items I use the bain-maries as pictured.

    The item in the larger bain-marie is a Monitor that I am rerusting, just leaving it in a cold soak of Citric Acid.
    For the larger items, just for steel, I use about 6 tablespoons of Citric.
    Other people use different methods, but this works for me.

    1328015729-IMG_3748_opt.jpg 1328015757-IMG_3750_opt.jpg
     
    Last edited by a moderator: Jun 26, 2015
  9. Samsvea

    Offline
    Joined:
    May 8, 2011
    Messages:
    20
    Many thanks for this. I've used TCut sucessfully on the Svea 123 cup and handle!

    Sam
     
  10. Svea 121

    Offline
    Joined:
    Jan 18, 2012
    Messages:
    168
    HI IANI;

    Great job on the 8R and the 123. Very nicely done. They look like brand new.
    Could you please tell us about exact proportions of citric acid and washing powder (cloths detergent?). Like so many teaspoons per so many liters of water.
    Did you use the paint on the box only or also on the burner?

    Best
    Daryoush
     
  11. Admin

    Admin Courtesy of Iani

    Offline
    Joined:
    Aug 22, 2008
    Messages:
    1,350
    Hi Daryoush

    Its dessert spoons and not teaspoons.

    2 + 2 in a saucepan, that holds approx 5 pints of water.

    I have used a bigger container, to submerge the tank up to the riser tube, using the same amount of Citric etc.

    If you are going to put the whole stove in, just weigh it down with another saucepan full of water on top.

    If you are referring to the paint on the burner, no, but on the pot supports yes.

    You will find what suits you best at the end of the day.

    Hope this helps.

    Ian
     
  12. Svea 121

    Offline
    Joined:
    Jan 18, 2012
    Messages:
    168
    Hi IANI

    Thanks for your reply. Can I use the same mix for cleaning inside a tank? I mean the green tarnish. Is washing powder the same as powdered detergent? And if you could kindly explain what you call a bain marie set up.

    Best
    Daryoush
     
  13. Admin

    Admin Courtesy of Iani

    Offline
    Joined:
    Aug 22, 2008
    Messages:
    1,350
    Hi Daryoush

    Powdered detergent is the same as washing powder, that your wife washing your clothes in.

    To clean the inside of the tank, go to your local gun shop, and buy some steel buck shot.
    Fill 4 egg cups, that will be enough, and place the shot in the tank, replace filler cap, and then, just imagine you are in a Latin American band, playing the Maracas - and shake.
    Remove the shot, and wash out with Kerosene.
    Repeat if necessary.
    Wash the shot, with any liquid detergent, and dry the shot out, so that it doesn't go rusty, and you will then be able to use it again.

    My Bain Maries are just large Stainless Steel containers, that are big enough to take stoves etc etc.

    Hope this helps,

    Ian