In another posting here in spiritburner, I asked about the suitability of an Optimus cookset to nest my new SVEA 123R. I got some good recommendations, but some of the sets are either too expensive or unobtainable. I instead turned to a relatively inexpensive solution: the hard-anodized Coleman Exponent Solo aluminum cookset (currently $19 at Campmor in New Jersey): This cookset consists of two nesting pair of pots and pan/lids, along with a stuff sack: The 123R will not fit inside the smaller pot/pan, but will nest inside the larger pair. (I crafted a neoprene sock for the stove to prevent rattle/scratching): One problem became readily apparent when I nearly burned the beejeebees out of my fingers when making a pot of coffee using the cookset - uninsulated handles! My inexpensive solution was a US$3 section of black silicon tubing. Fortunately, the handles are easily removed and reattached: A short section of tubing was then slid onto each pot handle. Note that the entire handle is not covered. This ensures that any heat or flame does not come into direct contact with the tubing: The result is a fairly cheap upgrade and matching nesting cookset for my 123R: I use the smaller set with a tiny homebrew alcohol semi-pressurized sideburner (Whitebox-type fashioned from one of Madame's used aluminum mousse cans) for a quick java break while bicycling on the local trail: Thanks to all on spiritburner for posting their pics and recommendations. I hope this helps other 123R owners.
Nice-- i put the rubber tubeing fix on my things to do list---with all the "make do's" we see for at 123 cook kit i would bet someone could come up with a ready made one that would sell..
hi, check the price on these cook kits on the coleman website $30, at my last look. i bought two from campmor for $20 before christmas. i like the neoprene handles. great idea! have a great day
I just bought a set of these on evil bay the rubber you used on the handles did you just pick it up at home depot?
Ive got one of these sets and the larger one works great with the Svea! I use the smaller one with an alcohol burner on day hikes sometime
Nice pot nest I wrap the valve stems of my 123/71's with fibreglass wicking and a couple of turns of copper wire, now the priming wont spill(or not much), especially useful if you prime with gas like me
L.A.: I use the same set up for my 123. Used it last week on a job. I found that a Crux in it's case and the smallest gas cartridge will fit in the smaller Exponent pot. Paul
Just wondering under normal conditions, is it really usable for cooking other than just boiling water and noodles for this types of pot set? Although I would think its up to the user what he cooks in these small set ups. Ron
I also have been using the Coleman pot with my 123. I don't bother bringing the cup that came with the 123 though. Great tip on the tubing, thanks! Marcus
I came across a neat modification for these coleman pots on youtube. [media=youtube]df6liVhZXvA[/media]
I have been using the GSI Soloist for about 5 years with the Svea 123R. GSI Soloist It is very similar to the Coleman set, although just about twice as much expense. However, for that extra money, you get some real value. First, there is the lid. It is a heat-ready Lexan, with some small holes in one side so that you can drain water out of pasta etc. The 2nd big advantage is the cup/mug. With the neoprene sleeve, you can eat or drink out of it without burning your fingers. The handle for the pot folds over the top when stored, holding everything in place. It has some kind of plastic on it, much like linux_author's neoprene sleeve. I have to remove the pot supports from the Svea to get the lid to close properly, but this is no problem -- I just slide them in a cloth bag down alongside the stove when packing it away. Also, the little cap/cup/pot which comes with the Svea will fit if you mush it down a bit; with the pot supports out, this works. With this set-up, you don't need it, yet if you want it handy for a quick brew-up -- I do use it that way pretty often, when I just need a cupful of hot water -- you have it right there. I like options. All in all, it is a great combo. As much as I love my vintage Sigg Tourist cookset, I only use it for car camping now. Back in the day I thought it was the nazz, but the lure of lighter weight is powerful. This GSI Soloist set up is not ultralight LOL. But it is compact, light enough, works great. I use it in a number of scenarios.
Thanks Linux Thats a great suggestion as I was looking for a cheap way to both "Store" my SVEA123 stove while in transit as well as have a decent pot that I could put the stove in at the same time. I have a old 1952 military stove that came with a aluminum pot that the stove nest in very nicely and has a top to it that is perfect for 2 cups of water. It both protects the stove as well as doubles as a pot for me. I was looking for something to do the same with the SVEA123 and at 20 bucks thats perfect. I also sort of like the GSI solist option too as it has a good sized pot for cooking a decent meal in other than just boiling water. Also that pot cozy keeps the food warm longer too which is great for rice and to help save fuel.
Or you may consider the GSI Cup which fits over the 123 just like the original cup, but is much more versatile.
