Probably not my best purchase, however 96's are without doubt my favourite stove. This appears to be a version 9, the fire basket is distorted and stuck on the vapouriser. I would think is the reason it is distorted! |imgRemoved| There are two two dings on the tank which I intend to use the hydro and freezer method to see if this will help reduce them in size. |imgRemoved| I had intended to use a blow torch and some "gentle" tapping on the basket and vapouriser to part them and reform the fire basket, is this the best method for somebody of little and limited fettling experiance? |imgRemoved|
Not too sure what happened to my pics, they were there to begin with but I double posted them, perhaps they went in the edit?
Hi Mick Somewhere in the CCCS site is a post by Brian Kaw550red. He fabricated a nice little puller specifically for that problem.
Hi If not contact Bryan direct & see if he'll do it for you , can't hurt to ask the dark side of the force is strong down his way Best regards Stu
Removing the burner bell from the vaporizer. Heat the burner bell at the coller only, then quench the vaporizer only. Usually falls off If not, then give light twist with wrench while bell is still hot.
