Steam punk stove

Discussion in 'Stove Forum' started by presscall, Mar 27, 2013.

  1. presscall

    presscall United Kingdom PotY Winner SotM Winner SotY Winner Subscriber

    Offline
    Joined:
    Aug 25, 2009
    Messages:
    13,937
    Location:
    Lancashire, United Kingdom
    'Steam Punk' is what came to mind when I took a close look at the intricate pipework on a Landers Frary & Clark 'Universal' alcohol stove burner.

    1364423288-IMGP4445.JPG

    1364423307-IMGP4447.JPG

    1364423314-IMGP4449.JPG


    Here's the burner reunited with the fuel tank and there's a cap that goes over the burner - although it's not needed to snuff the flame (there's a control spindle shut-off for that) and I can't see that evaporation of the fuel without that cap on would be significant.

    1364423338-IMGP4462.JPG

    1364423347-IMGP4461.JPG


    The stove is part of a chaffing-dish set meant for the breakfast sideboard to keep food warm and once I've given the other bits, including the trivet, a good clean I'll feature it in the Reference Gallery.

    It puts out a fair bit of heat but throttles down well to a useful simmer

    1364423359-IMGP4457.JPG

    1364423365-IMGP4459.JPG

    1364423371-IMGP4460.JPG

    John
     
    Last edited by a moderator: Jun 26, 2015
  2. Spiritburner

    Spiritburner Admin

    Offline
    Joined:
    Jul 23, 2004
    Messages:
    11,674
    Location:
    UK
    Very apt category for that!
     
  3. Viscara

    Offline
    Joined:
    Jul 8, 2011
    Messages:
    734
    Location:
    Originally Silicon Valley now in Netherlands.
    I really like this stove. I am bit partial to alcohol stoves and like how they burn quietly and with such a blue flame. No odor as well. This stove looks really nice and perfect with the control knob. Please do show some photos when your restoration job is done.
     
  4. Zincman

    Offline
    Joined:
    Jul 18, 2008
    Messages:
    2,382
    Location:
    N Yorkshire
    That is a beauty!!!
     
  5. kerry460

    kerry460 Australia R.I.P.

    Offline
    Joined:
    Aug 20, 2010
    Messages:
    2,357
    G,,day.
    I like it.
    kerry
     
  6. Gneiss

    Offline
    Joined:
    Sep 18, 2012
    Messages:
    217
    What a great little stove... :thumbup:
     
  7. Derek R.

    Offline
    Joined:
    Aug 25, 2008
    Messages:
    493
    A beauty. Now you need a nice ornate trivet to take a utensil.

    Some technical design work gone into that.
     
  8. loco7stove

    loco7stove Subscriber

    Offline
    Joined:
    Sep 30, 2010
    Messages:
    1,394
    Hi John

    Thats a little cracker 8) :thumbup: , am i the only sad one here who is mesmerised by the clear blue flames on a well runnung stove :doh: :D :thumbup: , Obviously not :D/ :D :thumbup:

    Stu :D :thumbup: .
     
  9. Lance

    Lance Subscriber

    Offline
    Joined:
    Jul 25, 2004
    Messages:
    6,004
    Location:
    Northwestern Illinois
    These are very good for their intended purpose as well as for making tea. I use one for heating/boiling tea water when working in my basement. The advantage is i can fire up and leave it for a time and not worry about boiling my kettle dry if i don't get back to it right away. I have two of them and they both work just fine.

    lance
     
  10. rik_uk3

    Offline
    Joined:
    Aug 15, 2004
    Messages:
    9,387
    Location:
    South Wales UK
    Last edited by a moderator: Jul 1, 2015
  11. bajabum

    bajabum R.I.P.

    Offline
    Joined:
    Dec 23, 2005
    Messages:
    7,368
    I ran across two F&C stoves several months ago, but they appeared to be made of Tin???

    One was in fair condition, but rusty, and had a matching tin F&C Samovar on top!

    Alas, $60 was above my budget (and interest in alkies).

    It might still be there, if anybody is interested?
     
  12. presscall

    presscall United Kingdom PotY Winner SotM Winner SotY Winner Subscriber

    Offline
    Joined:
    Aug 25, 2009
    Messages:
    13,937
    Location:
    Lancashire, United Kingdom
    Last edited by a moderator: Jul 1, 2015