TURM SPORT Parts

Hi all.
I bought TURM SPORT from eBay past time.
But my TURM SPORT is missing its end of generator pipe nut.
So I want to repair this. Please let me know some advice.

Is it possible to obtain a replacement nut and, if so, where from?

YOSH

 

Here you go Do what I did. Works a charm. I use mine daily and love it, not really concerned about originality.

 

What is that substitute nut Andy ?

 

Ray, I think it grows on trees and in wine bottles.....

 

Hello YOSH and welcome to the forum.

I am afraid, you will have almost no chance to find a original cap. These stoves have been produced for a relatively short time and are rare. The thread of the cap is one of the odd threads used for classic Swedish stoves.

If you could find a old PRIMUS spirit can (Part No. 1738 ), its lid would fit exactly. But maybe these cans have not all the same filler size, who knows.
The pictures show you the original TURM SPORT hexagon cap and a spirit can and its lid.

Best Regards
Radler

 

@Wim ooops

Still took me a while after your clues what a wally

 

I measured the thread from Primus 1738 spirit can: Outer diameter is 10.7mm and pitch 24 tpi. I would think if you find or make the cap with M11x1 thread it will work (even if is not perfect match). That M11x1 thread is also not so common but tools for it are available...

 

Thanks all,

I ordered M11X1 thread Tap and hexagon brass bar. I'll try to make the cap.
I will be reported here if the attempt was successful.

Sorry for my bad English.

YOSH

 

@YOSH

Your English is fine and easier to follow than some English-speaking writers .

Tony

 

@Tony

Thank you!

 

After all,I got M11x1 thread Tap,hexagon brass bar and seal tape.Then cut the bar,drilled the piece,made a thread...

The resulting end cap was so so...(^^
But it's no leak.

Thanks all for suggestions.

 

Oh yes, resulting end cap looks so so... excellent work!

Nice replacement and now we all know how to fix it!

 

Afterburner, thank you for your useful info!

 

Tony, Thank you!

 

Hello YOSH
I like to see another TURM SPORT safed. They are worth it, to be kept usable. And I like the way how the solution was found in this forum and the result!
Gratulation YOSH and happy hours with the stove.

Best Regards
Radler

 

Excellent work Yosh. Is the thread on the top filler tank cap the same ?

 

Radler,
Thank you!I would like to enjoy camping with this stove.

alnl1996,
Thank you! No,the filler cap's thread is not same.Filler cap thread is bigger than my end cap. But I can't measure it.