Best way to clean rust from a stove tin?

Discussion in 'Fettling Forum' started by Duran, Feb 6, 2017.

  1. Duran

    Offline
    Joined:
    Jan 3, 2017
    Messages:
    119
    Hi everyone,

    What's the best way to remove rust from a stove tin please, I just got an Optimus 80 and got it to run fairly well. The tin is holding up but it has some rust especially inside.

    Best way to deal with it please?

    Thank you in advance.

    Aaron

    IMG_0466.JPG
     
  2. butthead

    Offline
    Joined:
    Dec 9, 2014
    Messages:
    100
  3. Duran

    Offline
    Joined:
    Jan 3, 2017
    Messages:
    119
    thank you so much sir!
     
  4. z1ulike

    z1ulike United States SotM Winner SotY Winner Subscriber

    Offline
    Joined:
    Mar 6, 2010
    Messages:
    4,604
    Location:
    Santa Barbara, CA
    I use a product called Evaporust with good results.

    Ben
     
  5. Duran

    Offline
    Joined:
    Jan 3, 2017
    Messages:
    119
    Thanks Ben, is it something I can get at a Home Depot or Lowes?
     
  6. z1ulike

    z1ulike United States SotM Winner SotY Winner Subscriber

    Offline
    Joined:
    Mar 6, 2010
    Messages:
    4,604
    Location:
    Santa Barbara, CA
    Yes, and also at auto parts stores. Just buy enough so that you can submerge the entire tin in the solution and let it soak. Once the rust is completely dissolved simply rinse it off with water, dry it, and immediately coat it with something to prevent it rusting up again.

    Ben
     
  7. Duran

    Offline
    Joined:
    Jan 3, 2017
    Messages:
    119
    it doesnt hurt the paint?
     
  8. z1ulike

    z1ulike United States SotM Winner SotY Winner Subscriber

    Offline
    Joined:
    Mar 6, 2010
    Messages:
    4,604
    Location:
    Santa Barbara, CA
    No it won't hurt the paint but it will take decals right off. I learned that the hard way. You should coat decals with Vaseline before soaking them.

    Ben
     
  9. ArchMc

    ArchMc SotM Winner Subscriber

    Offline
    Joined:
    Jul 25, 2004
    Messages:
    4,711
    Location:
    Mojave Desert, California
    Ospho also works well, and may be carried at some stores that don't have Evaporust. It doesn't remove paint. In fact, it doesn't seem to dry on a painted surface, and has to be wiped off. It leaves a coating on the formerly rusted surface that can be painted if desired.

    ....Arch
     
  10. igh371

    igh371 SotM Winner Subscriber

    Offline
    Joined:
    Jun 23, 2013
    Messages:
    2,904
    Location:
    Durham
    Many alloy wheel cleaners work as a cheap alternative to surface rust treatments. Look for the ones that contain phosphoric acid, way cheaper than buying Jenolite or other phosphoric acid based rust treatments, but have the same end result in leaving a protective coating which can be painted over after it has been wiped or rinsed and dried.
     
  11. Duran

    Offline
    Joined:
    Jan 3, 2017
    Messages:
    119
    Lots of awesome information, thank you all.

    I have a problem, buying stoves will take me to the cleaners. May need an intervention..:-)
     
  12. z1ulike

    z1ulike United States SotM Winner SotY Winner Subscriber

    Offline
    Joined:
    Mar 6, 2010
    Messages:
    4,604
    Location:
    Santa Barbara, CA
    After using Evapo-Rust to remove the bulk of the rust I often paint on Ospho and let it dry to stabilize what's left, prevent flash rusting, and prep the surface for painting or waxing. Evapo-Rust removes rust. Ospho converts rust.

    "Evapo-Rust rust remover is an environmentally safe, water based product that has been proven to make even deep rust disappear in minutes without scrubbing."

    "OSPHO causes iron oxide (rust) to chemically change to iron phosphate - an inert, hard substance that turns the metal black."

    Ben