Rechaud a Alcool

Discussion in 'France' started by optipri, Mar 5, 2017.

  1. optipri

    optipri Subscriber

    Offline
    Joined:
    Oct 28, 2005
    Messages:
    636
    An unknowned model of a gravity alcohol burning stove. I is very similar to this Charles Ygred, only the colour is different. Question is what is the connection between these companies, or is it the same one?

    Bo

    CIMG9009.JPG CIMG9010.JPG CIMG9011.JPG
     
  2. orsoorso

    orsoorso Subscriber

    Offline
    Joined:
    Mar 30, 2011
    Messages:
    579
    There are many French alcohol stoves like this, but they are not exactly "gravity fed" I would prefer to call them as "encased wick alcohol gas" stoves.
     
  3. optipri

    optipri Subscriber

    Offline
    Joined:
    Oct 28, 2005
    Messages:
    636
    You are right, this is actually not a gravity fed stove.
    The fuel is drawned through a wick like on many of these French models.

    Bo
     
  4. shagratork

    shagratork United Kingdom Moderator, R.I.P. Subscriber

    Offline
    Joined:
    Aug 9, 2005
    Messages:
    9,633
    Location:
    Durham, N.E. England
    'encased wick alcohol gas' stove is OK , but I would drop the word 'gas' because it is not a gas stove.
    For general use, I would also miss out the word 'alcohol' and just call it an 'encased wick' stove.
     
  5. Stonehopper

    Offline
    Joined:
    Jun 18, 2008
    Messages:
    2,054
    Pretty sure there is no wick in mine. The Alcohol/meths from the tank runs to the vapourising tower and is pre-heated with fuel put into the spirit cup. Thus heated, the fuel in the tower vapourises into gas, travels along the upper tube from the tower top, to the tapered valve, where opening the control knob allows the gas to mix with air and pass along to the burner jets, which in turn continue the process of heating the fuel in the vapourising tube.

    And it does say "alcool" on the top plate.

    Rechaud GAI.jpg Rechaud 013a.JPG
     
    Last edited: Mar 7, 2017
  6. presscall

    presscall United Kingdom PotY Winner SotM Winner SotY Winner Subscriber

    Offline
    Joined:
    Aug 25, 2009
    Messages:
    13,937
    Location:
    Lancashire, United Kingdom
    @Stonehopper
    I do like a good drawing Derek and that's an excellent one. I particularly like your coining of the term 'vapourising tower' which describes its form and function perfectly.

    It also illustrates well that although the fuel tank isn't perched up above the trivet level as with some designs, there's still a 'head' of fuel above the base of the burner vapourising tower so it is in fact still gravity fed, I agree.

    A Turm type of alcohol stove has the sort of wick that Optipri has in mind in the fuel supply tube that also acts (at the burner end) as a vapourising tube and when there's a wick there's always an access screw cap to remove and service or replace it.

    John
     
  7. dusan

    Offline
    Joined:
    Apr 13, 2014
    Messages:
    214
    Location:
    Brno/CZ
    IMG_0768.JPG

    Wick of similar stove.

    Dusan
     
  8. Stonehopper

    Offline
    Joined:
    Jun 18, 2008
    Messages:
    2,054
    Thanks John - and Dusan. On mine that bottom screw on cap is so seized, I dare not apply enough force to remove same. So there IS a wick inside! I can understand why, without there might be the possibility of a flash back of sorts into the tank of fuel!