Post your flame shots here!

Discussion in 'Stove Forum' started by presscall, Sep 21, 2011.

  1. Gtbikedoc

    Offline
    Joined:
    Oct 16, 2015
    Messages:
    2
    I brought it back to life IMG_20180309_155507.jpg
     
  2. Robtz

    Robtz Subscriber

    Offline
    Joined:
    May 11, 2007
    Messages:
    575
    Location:
    Wellington, N.Z.
    You sure did. A grand job indeed.
     
  3. Mark Layman

    Offline
    Joined:
    Feb 20, 2018
    Messages:
    423
    Location:
    USA West Virginia
    New to me Optimus 00

    595DDCFE-4DFD-4959-B12C-DC1EA1C8D90B.jpeg
     
    Last edited by a moderator: Apr 7, 2018
  4. LanternTom

    LanternTom Subscriber

    Offline
    Joined:
    Apr 15, 2014
    Messages:
    38
  5. Mark Layman

    Offline
    Joined:
    Feb 20, 2018
    Messages:
    423
    Location:
    USA West Virginia
    Here is my newly fettled AC nickel 210.

    F7D039E2-1097-4389-8475-6A7314C7053B.jpeg
     
  6. Garth

    Offline
    Joined:
    Apr 3, 2018
    Messages:
    475
    NZ made zip stove started badly but settled down to a clean flame.

    WP_20180406_14_59_12_Pro.jpg

    WP_20180406_14_56_49_Pro.jpg
     
  7. Robtz

    Robtz Subscriber

    Offline
    Joined:
    May 11, 2007
    Messages:
    575
    Location:
    Wellington, N.Z.
    I have always wondered how those zip made stoves went i.e how well they performed compared to, say, their probable parentage by plagerisim - Coleman, etc.
     
  8. Garth

    Offline
    Joined:
    Apr 3, 2018
    Messages:
    475
    Massive heat output I was surprised by it but feel a bit uncomfortable using petrol stoves ,also its not that economical on fuel 20 minutes near used a litre of fuel. At this stage its a backup for my optimus 22 which has served 3 generations of my family these big suitcase stoves do seem to be very similar to each other got another here too a unimet from Hong Kong very cheaply made thing but may attempt to get it going one day
     
  9. Garth

    Offline
    Joined:
    Apr 3, 2018
    Messages:
    475
    They're a great stove I got a later one a few days back very dirty but doubt it has seen much use in its life it has a small tube clipped to the side of the burner , the other end rests in the primer cup I've not figured the purpose of it but all works ok with it fitted
     
  10. Tony Press

    Tony Press Australia Subscriber

    Offline
    Joined:
    Jun 8, 2013
    Messages:
    10,858
    Location:
    Stinkpot Bay, Howden, Tasmania, Australia
    @Garth

    Your small tube sounds like a pilot light. The idea is that it sits in the metho and wicks some to the top so that when the preheating is almost complete, there’s a small flame to ignite the burner.

    Cheers

    Tony
     
  11. Robert Bruce SotM Winner

    Offline
    Joined:
    Jul 22, 2007
    Messages:
    1,802
    Location:
    Springrange NSW Australia
    F923BC1B-140C-424F-8D6B-E9F26EC4B37E.jpeg

    A8991950-73E1-4647-A4BE-7399A67946D8.jpeg

    C1A74064-138C-475A-96EF-BE50CB23D063.jpeg

    B2F47CDE-2211-44F9-8809-4E2682A74F57.jpeg

    Here is my old Metacel with a silent burner heating up a Coleman oven. I have been using this stove in this way since I got it not so long ago. I have replaced the usual seals but not cleaned it. I may leave it as is. This shot was taken last week in our fishing hut. The first shot is our old dog then the oven , last is the hut.

    Cheers
    Rob
     
  12. Wim

    Wim Subscriber

    Offline
    Joined:
    May 12, 2009
    Messages:
    4,765
    Location:
    Dendermonde, Belgium
    I like the hut Rob! Is it old, or build using old wood etc.?

    Best regards,

    Wim
     
  13. GeneH

    GeneH Subscriber

    Offline
    Joined:
    Dec 6, 2012
    Messages:
    178
    ...working on it. :-k :thumbup:


    IMG_4632.jpg
     
  14. Garth

    Offline
    Joined:
    Apr 3, 2018
    Messages:
    475
    The Coleman oven works ok with a single burner? I've been looking at buying one myself might be able to put my primus #5 to work
    I'm still a bit uncomfortable with my petrol stoves plus its very hard to find around here unless you buy Coleman brand and pay a ridiculous price for it
     
  15. Robert Bruce SotM Winner

    Offline
    Joined:
    Jul 22, 2007
    Messages:
    1,802
    Location:
    Springrange NSW Australia
    Wim , the hut is a reconstruction of an old one we purchased some 15 years ago. It is all timber except the footings. I am lining and insulating it now so hopefully it can be ok for winter. Some help from friends but mostly I have done it by my self.
    Cheers
    Rob
     
  16. Robert Bruce SotM Winner

    Offline
    Joined:
    Jul 22, 2007
    Messages:
    1,802
    Location:
    Springrange NSW Australia
    Garth, the Coleman oven works well, it was an eBay purchase. One burner kero stove gets it to 200 deg C in a few mins, I just put some allumunum foil around it , this works wonders. I have been using it for the last twelve months with no regrets.
    Cheers
    Rob
     
  17. Matthijs

    Offline
    Joined:
    Jul 11, 2017
    Messages:
    34
    Location:
    Netherlands
    Yesterday this 111T arrived, the previous owner used it with gasoline, also preheated with it:( I put fresh clean fuel ("wasbenzine") in it and tried it. Burns very hot, next time I will try it on kerosene. Has anyone an idea whats the use of cutting in the flameshield, more air perhaps?
    2018-04-12 20.21.05.jpg 2018-04-12 20.27.33.jpg
     
  18. Mark Layman

    Offline
    Joined:
    Feb 20, 2018
    Messages:
    423
    Location:
    USA West Virginia
    Air and access to spirit cup for lighting and priming.
     
  19. Mark Layman

    Offline
    Joined:
    Feb 20, 2018
    Messages:
    423
    Location:
    USA West Virginia
    oh my what a bangin 123R.
    Woke her up as been pared with an Optimus 88 cookset.
    This old stove goes like crazy.

    737587AE-81F3-45B2-9436-14F7CC615DBC.jpeg

    FCDAE4F1-BE6C-407C-8515-CD1548D1E79F.jpeg
     
  20. Harder D. Soerensen

    Harder D. Soerensen United States Subscriber

    Offline
    Joined:
    Oct 24, 2017
    Messages:
    2,156
    Location:
    Denmark
    WOW - Did you pre-pressure it with a pump?