Found this in the garage, the control key or shaft is missing. * How to repack the gland ? Just add graphite ? * How to reshape the bent rim ? * Wonder if it will fit into a later model fount ? * Any idea what size burner caps to order ? Thank you. Just wish I had the complete stove....
There’s a post from some tears ago about reshaping the burner. I’m sure you’ll find it. Or just use parallel jawed spanners and a small peening hammer. The packing is graphite. The burner caps are normal silent burner dimensions. I might have either a Sievert or an Aladdin shaft to fit that burner. That burner will fit Swedish and Australian No. 1 and 5 (and other) stoves. Cheers Tony
@Tony Press I'll need to buy that control shaft thanks, when you find it. I note that it is an on/off/simmer valve, yes ? With a built in pricker wire. Clever. Pack the nut with graphite ? Thanks. Paul.
As it is a clone of the Radius 10/36 burner - this drawing of the Optimus 207 burner would be correct enough.
Paul I’ve found a generic (unmarked) control wheel and shaft that fits that burner. I’ve also found a shaft only. Photos in the morning. Cheers Tony @Paul Aslanides
