Where to find spares for Enders?

I am in need of a gasket for my Enders Binzen-Baby 9063. It is the gasket that is inside the tip of the pump on the military style stove. It seems that other members have mentioned Russenjesus as a possible source. How do I contact him? Please advise.

 

Put @ and then the members name eg @Russenjesus

 

Actually it's better to contact a member in private in cases like this.
Just click on a username and then click on 'start a conversation'.

Here's Russenjesus profile.
A bit down you see the link for a private conversation.

 

Thanks! Also, I have only recently started working with camp stoves. With the help of Steve Lave, I was able to refurbish an Aladdin M1942. I have an extensive background in repairing sewing machines and was able to use some of my knowledge and supplies. Question: when I pump my stove, the air builds up pressure to force the gas into the burner. But how does the pump work to get air into the tank? I realize that this is a total "girl" question. Thanks!

 

Hi @S. Lightner welcome to CCS.
How pumps work:

Typical pump assembly

Non-return valves

Best Regards,
Kerophile.

 

@S Lightner,

Just go to old coleman parts and order the pip for the M1950 stove and the 3-piece filler cap casket. They are a perfect fit.

These work better the the round O-rings. The flat filler tube gasket is the problem one to find. I've gotten close but the one's I've found were thicker and harder to seal.

Mike

 

What about the little spring? Is there a substitute? Thanks

 

@Remus1956 Have gotten NVR kits from Fettle Box UK site host . Several kits have the very light spring, got mine from 22B kit . You can cut the 6mm pip from cork or rubber gasket DIY style. Does not need to be perfect circle to fit in cup and work. Keep at it and you will find a combo that your enders likes, took me a while.

 

@HunterStovie Thanks for the information on the Old Coleman Parts. I searched in the US for the flat filler tube gasket and was unable to find one. However, I just got a reply from RussenJesus and he has them in Germany! So glad! I'll keep you posted on the cost and any information he sends.

 

@Daryl thanks man, and another person from Socal. Nice. I am working a few angles, this is the only stove I have ever had problems finding parts for.

 

I now have the gasket for my Enders Benzin-Baby 9063 on the way. They are coming from RussenJesus. I will let you know when they arrive. Susan

 

I joined this forum because I need a gasket repair kit for an Enders Benzin Baby 9063. I don't seem to be able to contact RussenJesus directly here; maybe because I just signed up? Any help in providing a source for the Enders gasket kit is appreciated.

Tim

 

Classic Camp Stoves - Error
You do not have permission to view this page or perform this action.

 

@Russenjesus

 

The gentleman they told you to contact is a very good guy. I bought parts from him when I fist got my Enders baby.

 

Hello Tim,
what seals do you need?

Enders-Rundumsorglospaket - Full-Enders-Repairkit

I know there are 2 or 3 sellers on german E-Bay, who sells nearly the same parts, but I only sell to stove-friends like here:-) No online-shop!

Please show me a picture of your 9063, there are two types of it.

Have a nice day

Markus(RJ)

 

Thanks, here is a photo of the disassembled stove. As you can see, the leather gasket and o-rings have to be replaced.

 

Have you checked the photo and do you have a seal kit?

 

Hello Tim,
sorry for my late answer, my broken hand is not in good conditions just now,
yes ihave a seal set with leather.
Do you need a graphite packing too?

Have a nice day
Markus(RJ)