Standard 296

Discussion in 'Other Brands' started by JacobLotz, Nov 25, 2014.

  1. JacobLotz

    Offline
    Joined:
    Dec 2, 2013
    Messages:
    101
    Hello,

    Again a post of mine. I just got bored this evening. This time it is a Standard 296 which a found at a local second hand store. The seller said it was an oil lamp. Funny.

    1416951256-2014-11-25_22_opt.jpg
    The stove came with some kind of leggs. I think these were made by a previous owner to give it some height.

    1416951247-2014-11-25_21_opt.jpg 1416951231-2014-11-25_21_opt__7_.jpg 1416951219-2014-11-25_21_opt__6_.jpg 1416951130-2014-11-25_21_opt__1_.jpg 1416951240-2014-11-25_21_opt__8_.jpg

    The burner came with the extra leggs and was all complete. The box is very damaged. The lacque of the lacquer has had it best time. I think it is OK for now, so I still could use it at campingtrips.

    1416951146-2014-11-25_21_opt__2_.jpg 1416951200-2014-11-25_21_opt__3_.jpg 1416951209-2014-11-25_21_opt__5_.jpg

    I had to replace the NRV with an Petromax NRV. Those are easy to obtain in the Netherlands. Next week I will give it a swing. So I can post some actionphoto's.

    Jacob
     
    Last edited by a moderator: Jun 27, 2015
  2. z1ulike

    z1ulike United States SotM Winner SotY Winner Subscriber

    Offline
    Joined:
    Mar 6, 2010
    Messages:
    4,597
    Location:
    Santa Barbara, CA
    Those pointed legs are interesting and I kept coming back to your post trying to figure out why someone went to the trouble of making them. Being from Southern California where it's warm and sunny most of the time, they didn't make much sense. Then I noticed that you are in Norway where it snows in the winter. My guess is the legs are meant to stick in the snow and keep the stove above it and level. I've never camped in the snow but I can imagine this being more stable than setting the stove directly on top of the snow which might begin to melt beneath it.
     
  3. JacobLotz

    Offline
    Joined:
    Dec 2, 2013
    Messages:
    101
    That is a nice theory! Will keep that in mind. The 'leggs' are made of big nails. The heads of the nails are cut of. The pan supports also have been adjusted a bit so that the pan is closer to the burner. I can understand that in this way the burner would work better in colder conditions.

    Jacob
     
  4. Afterburner

    Offline
    Joined:
    Mar 13, 2014
    Messages:
    2,553
    Location:
    ±Finland°
    JacobLotz seems to be from Netherlands, where I believe to them to have snow not too often.

    Those kind of legs only would help in very hard snow or on ice. On "normal" snow those kind of short legs would not help too much. If there is more "normal" snow than length of those additional legs they would not help to keep stove on the top of the snow. Stove would sink into snow since three thin legs don't have enough surface to keep stove on the top of snow.

    I bet that they have added extra legs to make cooking on ground more comfortable.
     
    Last edited by a moderator: Jul 2, 2015
  5. z1ulike

    z1ulike United States SotM Winner SotY Winner Subscriber

    Offline
    Joined:
    Mar 6, 2010
    Messages:
    4,597
    Location:
    Santa Barbara, CA
    Afterburner, it seems my knowledge of European geography is as bad as my stove leg theory. Thanks for setting me straight on both accounts. Damn, and I thought I was so clever coming up with that snow idea.
     
  6. Håvard Kvernelv

    Håvard Kvernelv Norway SotM Winner Subscriber

    Offline
    Joined:
    Feb 20, 2019
    Messages:
    159
    Location:
    Narvik, Norway
    Hi. I have great pleasure reading through old posts here.
    May I offer another possible explanation to the extra «legs»: could it be to make the stove more stable on soft or uneven ground?