NEW TOOL ALERT - Jet removal tool that I just had to mention

I have one of those cheap 4mm wrenches you get from England as a reproduction of the original tool and have had to fix it a few times, re-mash pins in it, and have hated the chore of removing jets on Primus and Optimus. I needed a replacement as I also have a bit of pride, and asking my wife who has little fingers to help me as I have the hands of a gorilla and holding tiny things like jets is a pain in the ass I started scouring around...looking for something better.
Looking on ebay I found a lot of repro tools like I already have, and a few "vintage" originals. Kinda pricey... then I spotted this from a seller and it looked good and I like the universal joint connections...so I went with it.

This made my changing of jets a life changer. The thing even has a little screw on the side to hold the jet in it so you can get it started when installing it. Its a thin tool too, so it fits in really easy.

If you ever get tired of nagging your wife to do a mans job of changing jets...this is the tool for you.
I don't sell them or know the vendor...I just mentioning it as I was very happy with it.

 

@Remus1956
Can you post the link please.

 

@Pharael here you go my friend!
Primus Optimus Stove Jet Removal Tool Nozzle Knuckle Removal Tool CAMPING STOVE | eBay

 

Many thanks!

 

It says out of stock

 

There had/has been a Florida seller I’ve gotten a couple sizes from, handy.
Duane

 

40varga is the seller.

 

The universal joint is the weak spot on the cheap ones I have

 

Back in stock, and ordered.

 

@The Warrior did you get the 4mm or 5mm?

 

The 4mm. I'll probably end up with the 5mm at some point.

 

What the heck, ordered the 5mm as well. I noticed that I have purchased from the seller before, a nrv removal tool.

 

Does the 4 mm size fit the Optimus 111 burner jet?

 

According to the sales site, the 5mm does.

4mm Knuckle Nozzle Removal Tool
Optimus 00 type stove see item

5mm Knuckle Nozzle Removal Tool
Optimus 8R , 111 and 531 type stove see item
Radius 39

 

They're back in stock...I just got the 5mm

 

Back in stock since last Thursday.

 

Got these in today. Crappy photo.

 

What do you think? @The Warrior

 

Used 5 minutes ago on a Svea roarer burner to fit a nipple with a 0.32mm jet.











I got mine thanks to @Rodger Willows.

Cheers

Tony

 

@Tony Press
Inserting nipple/jets into roarer burners - the bane of my fettling existence!
Works well for you?