Recently acquired the stove. Do the fuel cap and pump tubes use o-rings or flat washers? Does anyone know what size these are? I have searched the forum and also see the kits on eBay but I don’t see the sizes mentioned anywhere. Also, all the posts and kits show o-rings. I realize they will work but would like to know if that’s what they originally came with or were they flat washers. The leather cup is good and the stove came with a spare one so I don’t need or want and entire kit. Thanks all in advance!
You can use a flat gasket for a Coleman 3 piece tank cap for the enders ... Old Coleman Parts > Lanterns > Filler Cap Gasket for 3 Piece Cap - S41 They're exact for the cap gasket The pip you can punch out yourself. I believe it's the same as the one for svea tank caps... But seriously it's really easy to punch them out yourself. You can even use the right size punch from a leather punch people use to adjust belts The pump tube I have used orings but find the gaskets for phoebus 625 pumps work best Phoebus 625 Pump Clamp Washer - The Fettlebox The internals for the pump depend on the type of pump you have. Some just use pips ..some use a larger flat gasket. Post some photos of the pump and cap... It would help. I've got like 6 of these baby stoves...and brought a few back from the dead
Enders 9063 pump shaft repair SilBrazing (Silver Braze) This is the same stove... You can see the internals in this post by @The Warrior and the pump repair I made Baby Enders No. 263 NRV Help
I need to get more orings of the proper material, been over 10 years since I bought mine from HF. Running out of sizes. Non viton at the time. Duane
Thanks all for the info. I have the Coleman cap gaskets and some extra pips. Just need the pump tube seal. Might have to order some extra parts for my Svea & Optimus stoves to make it worthwhile to place a Fettlebox order.
Daryl, do you know which # o-ring you used for the pump tube out of the HF kit? I have a local source for individual Viton and Buna o-rings. Thanks
