5 lobed tool for pump cap rebuild

Hello from the newbie!
So I’ve dived into work on various bits and pieces of the stoves I have. Pump cap lid has a hexagram shaped hole in it, can anyone point me to the tool that can be used here?
Thank you for any pointers,
Alicia

 

I use this ..
Svea 123 Penta Key Fits Svea Optimus 123 stove and more, key only , NOT Stove | eBay

 

Wow, that took less than a minute, thank you so much, @Remus1956, I knew someone would know!!

 

No worries!

 

Start adding more tools.
Duane

 

I made a penta wrench by filing down n Allen key works fine and was easy.

 

@Alicia O its a 5 point or 6 point?

 

TMI alert
5 sided is pentagram.

 

@snwcmpr yep...its why I asked. Probably meant a penta...never know.

 

Be careful removing the part, some have cracked it. For me, if the SRV seals I leave it, but it could be stuck. A few of a different design are easily taken apart.
Duane

 

Soak the cap in some denatured alcohol for 30 minutes prior to attempting to remove. This softens the shellac thread sealer.

For standard srv caps



For srv pump caps

 

Hit watch on YouTube...

They're BernieDawg's videos on how to rebuild the caps.

 

He doesn't want his videos posted elsewhere.

 

My bad, it’s a penta.

 

I stand corrected, pentagram it is.

 

Thanks, Duane, I won’t mess with it if it’s working.

 

And thanks to everyone who provided much needed information! I’m learning a lot here, and it seems that if it ain’t broke, don’t mess with it! When the weather gets warmer, I’ll post pics of the stoves I have. 8R, 99, 96, and a recently acquired 210. The 210 is complete enough to be run, just needs some pot legs.

 

Be careful using 5 sided tools that have rounded points. They tend to, often, result in damage to the SRV.

 

Ah, thank you for the advice. I shall observe carefully before and if proceeding.