The wife bought me a Taykit stove but was told that the windshield is missing. I've never seen one of these stoves before and it's usually a stove I wouldn't have bought (coil stove) but she was trying to find me something I don't have ..so... Anyone can take some dimensions? I'll post photos when I get it! Coming Monday!
Somewhere one here IIRC is a detailed post with dimensions, I found it years ago when I needed to make one.
@Majicwrench I ended up folding some brass sheet and got a very noticeable change in the way it burns... Way more consistent. I'll look and see if I can get some measurements by looking through the forum again but didn't have too much luck last time
I made one out of some little tin unit much like you have shown above. Was not made to the OE dimensions. Now I'm wondering where my Taykit is......
@Majicwrench made one like this...cut some triangle cuts into the sides to vent and hold together without needing to silbraze...
@richmay OOOOOOOOOOOOOOHHHH ok...thank you! I need to make mine a little differently...thank you so much. Owe you a coke!
@Remus1956 Picture with dimensions, all in mm (and you know what i am like with measurements ) any problems let me know.
