Coleman 425B

Discussion in 'Coleman No:425' started by IRM, Mar 26, 2024.

  1. IRM

    Offline
    Joined:
    Mar 23, 2022
    Messages:
    732
    Location:
    UK
    This arrived in time for the weekend in really great condition.

    It took minimal effort to get it going - a bit of penetrating oil on the lever for the fuel pickup, a clean of the generator and a rinse of the tank with acetone for good measure.

    upload_2024-3-26_22-10-17.jpeg

    upload_2024-3-26_22-10-38.jpeg

    upload_2024-3-26_22-10-59.jpeg

    How interoperable are the generators for these? Would a replacement generator for a modern 424 work on this?


    -R
     
  2. IRM

    Offline
    Joined:
    Mar 23, 2022
    Messages:
    732
    Location:
    UK
    I should mention the brass tank cap in the second picture was a temporary stand in whilst I sorted out a seal for the original.


    -R
     
  3. William Ritchie

    Offline
    Joined:
    Aug 3, 2015
    Messages:
    298
    Location:
    San Diego California USA
    Nice stove . Correct O ring for the original cap should be good to go . Do not know about the 424 generator , the one thats there is about as good as it gets , you can probably run 50 gallons of clean fuel thru it . A rifle bore brush with rod of about .22 cal should keep it clean pretty much forever if the jet is worn would be a different story . The one I have I need a new tank , the SRV area cracked and leaks fuel into the pump area . I have to say mine also has a lot more paint burned off the main burner area of the case . Again nice stove.
     
  4. IRM

    Offline
    Joined:
    Mar 23, 2022
    Messages:
    732
    Location:
    UK
    Thanks! It’s a much nicer stove than my ~20 year old 424. Much more solid, particularly the two burners..

    I wasn’t able to remove the spring from the generator, but didn’t try very hard. Is just a matter of some penetrating oil then pushing / twisting it out?

    The needle in the generator is a little crooked which has me thinking about a spare generator


    -R
     
  5. Robert Radcliffe

    Robert Radcliffe United Kingdom SotM Winner Subscriber

    Offline
    Joined:
    Mar 19, 2019
    Messages:
    1,268
    Location:
    Stockport UK
    A lovely stove indeed. These earlier stoves from Coleman are a different level to the modern ones. My preference is for the bigger 413 models. I don't think you'd be able to use a 424 generator, I'd check Old Coleman Parts and buy either an original NOS generators at $38, or one of their reproductions at $28.65. I know it'll add up with post, import etc but the stove is possibly worth it.
     
  6. IRM

    Offline
    Joined:
    Mar 23, 2022
    Messages:
    732
    Location:
    UK
    Thanks @Robert Radcliffe.

    I spent some time finding generator part numbers and came to the same conclusion. Two NOS are en route.


    -R
     
  7. Hwheel72

    Hwheel72 United States Subscriber

    Offline
    Joined:
    Aug 10, 2025
    Messages:
    34
    Location:
    KC,MO
    Older thread but just checking how your 425B is holding up? Really looks great!
     
  8. IRM

    Offline
    Joined:
    Mar 23, 2022
    Messages:
    732
    Location:
    UK
    @Hwheel72 - life has gotten in the way of my stove habit (flood, house move).

    It is tucked away in a box and I hope normal stoving will resume in the near future once my todo list gets whittled down to a more normal size.


    -R