Primus Stove Identification Help

Discussion in 'Stove Forum' started by AndyAdelaide, Oct 12, 2025.

  1. AndyAdelaide Australia

    Offline
    Joined:
    Oct 12, 2025
    Messages:
    11
    Location:
    Australia
    Hi All,
    Just picked up and old Primus Stove at a garage sale and not sure what the following 'codes' and numbers engraved on the stove are:
    Stove Primus No.1
    SV. No. 48624
    ENG. No. 171536
    and under the stove: Z29
    It would be wonderful if someone could enlighten me on the above?
     
  2. Tony Press

    Tony Press Netherlands Subscriber

    Offline
    Joined:
    Jun 8, 2013
    Messages:
    10,858
    Location:
    Stinkpot Bay, Howden, Tasmania, Australia
    Welcome, @AndyAdelaide.


    The Z indicates that the stove was made in 1935:
    Primus Dating Chart 1911 - 1964

    29 is an unknown manufacturing code of some sort.

    48624 is a Primus Patent number; and I think 171536 is also.

    No.1 is the model number (fitted originally with a roarer burner).


    Cheers

    Tony
     
  3. Ray123

    Ray123 Subscriber

    Offline
    Joined:
    Mar 18, 2012
    Messages:
    1,240
    Location:
    New Hampshire, USA
    Welcome. Yes, as Tony says the numbers are patent numbers. 48624 is the Swedish patent number for the recessed filler while 171536 is the English number. The recessed filler patent prevented over filling the stove. Even with the fuel filled to the top there was still some room for air space in the tank.

    @AndyAdelaide. @Tony Press
     
    Last edited: Oct 12, 2025
  4. AndyAdelaide Australia

    Offline
    Joined:
    Oct 12, 2025
    Messages:
    11
    Location:
    Australia
    Hi Tony,
    Thank you for your prompt and informative reply.
    Not sure what it's working condition is, I am looking forward to see whether I can fire it up in the day or two.
    Kind regards,
    Andy
     
  5. AndyAdelaide Australia

    Offline
    Joined:
    Oct 12, 2025
    Messages:
    11
    Location:
    Australia
    Hi Ray123,
    I appreciate your timely and informative reply.
    Kind regards,
    Andy
     
  6. Ed Winskill

    Ed Winskill United States Subscriber

    Offline
    Joined:
    Aug 20, 2004
    Messages:
    15,006
    Location:
    Tacoma, Washinghton, USA
    Welcome to CCS, Andy.
     
  7. Tony Press

    Tony Press Netherlands Subscriber

    Offline
    Joined:
    Jun 8, 2013
    Messages:
    10,858
    Location:
    Stinkpot Bay, Howden, Tasmania, Australia
    @AndyAdelaide

    First you should replace the fuel cap seal.

    Then ensure the jet in the nipple is clear. You’ll need a 0.32 pricker or a fine wire <0.32mm.

    You may need to do much more than that, and there are good resources here to work out what to do.

    Also, we’re quite good at answering questions.


    Cheers

    Tony
     
  8. AndyAdelaide Australia

    Offline
    Joined:
    Oct 12, 2025
    Messages:
    11
    Location:
    Australia
    Thanks Ed!