Hjorth ‘Caesar’ broken cast iron trivet repair

Very impressive John- a week back from Newark and it's looking smart and back in action!

I can almost smell that flame shot from above...

 

I reckon this trivet has the thinnest-section casting I’ve seen on a wick stove, going on comparison with other marques I’ve encountered, notably Beatrice and Rippingilles in the UK. It’s almost as though Hjorth knew they had the technical ability to cast thin and were showing off!

That said, it’s plenty strong enough to serve as a trivet, but like most cast iron stuff will fracture if roughly treated, like taking a heavy knock if dropped.

With two substantial dents and a crack on an upper surface the fuel tank suggests rough treatment at some time in its life.








Ian (@igh371) won’t have been the culprit and I commend him and custodian predecessors for hanging onto the trivet bits. They could so easily have been scrapped, stove and all.

I don’t have any urge, much less a strategy, for taking out the dents though I’m aware that a snarling bic would be a promising method. Mind you, my pal Duncan (@Zincman) is a master sheet matalworker and makes the snarling bic technique look easy.

Zincman




The sporty 3-wheeler he made (BMW bike engined).



John

 

Ah, but Primus made a point of promoting its ‘odourless’ qualities and it holds to that in use. A bit of a paraffin smell on extinguishing, but that’s all. It’s interesting that @Remus1956 has just now referred to wick stoves/sad iron stoves he’s seen in antique stores covered in soot. Entirely avoidable by not having the wick turned up too high. If it is, visible smoke appears out of the top, instantly stopped by turning down the wick a fraction. A serious user of this type of stove as opposed to those curious to try it before consigning it to the antique store would soon learn that and live in harmony with their wick stove.

The yellow glow from the flames picking out the model name.





John

 

It sounds as though from the burning qualities that Primus were as thorough in their testing and development with this wick diversion as they were with their pressure products.

 

I think so, Chris.