I' looking to anyone who could help me with this. I have a Enders 9061 which I hope to get camp-worthy. I have field tested it a few times and it works great. The recent trouble is after I pump the stove up and prime it (with valve closed), fuel is escaping from the pump assembly into the the top half of the tin. I figured it was the gaskets, which I replaced from another model, and it seemed much better. I let it burn a while, put it out and went inside. A while later when I went outside again I had a puddle of fuel in the tin once again, and I could watch as it was seeping out of the pump assembly. I'm at a loss, unless it is still a gasket issue. Any thoughts out there? Thanks, Matt
Take som pics and then send them to me. I am listed under the user name; "EVIL". I will give you my mail address as soon as you PM me. I believe I know what your problem is. Rob
Only 2 things will cause this as far as I know. 1) leaking non return valve seal. or seal from this to the tube. 2) hole in the tube. This is not common. Go for the non Return valve.
