...to make things work again! Snwcampr: I was able to get a good dunk test on initial refurbish of cap but once the pump is used it unseats the...
@IRM The conclusion I came to with my 123R was that a poorly-formed taper-threaded joint between the burner stem and the tank resulted in an air...
...prodded the jet with a 0.16mm acupuncture needle and done the dunk test: not a single bubble. So I am now concluding she needs a new wick....
I would say a dunk test is your next step. Empty out any fuel. Close valve and fuel tank. Chill stove in the freezer for a few hours or overnight....
...- the ones that are long out of nappies). A subsequent dunk test confirmed my fears - the font has a leak by one of the legs. What I had...
I might give it another go with hotter water. The last time was maybe a 50C difference which isn’t all that much given that the physics works in...
...over the filler cap, which seemed an unlikely design! I did a dunk test: no bubbles. I put some Aspen in and let it sit for a couple of days....
@Firestarter no bubbles with the dunk test. I changed the wick with a 100% cotton wick but the result is worse now… [ATTACH]
@Yannick Michel have you tried a dunk test to make sure all your new gaskets are working and there is no pinhole or stress crack?
The dunk test, mentioned above, will reveal any leaks. Please report back where bubbles come out.
...plates. Is that normal? I cleaned out the tank & did a dunk test, then fired it up using the flame spreader plate that looked more used. It...
Have you dunk tested it to see precisely from where the pressure is escaping? Are you sure it is from the joint and not a fault with the filler...
Majicwrench, I did not know about the dunk test until now :) I was informed by the seller that the gasket might need replacing (he included a...
What is the "dunk test"? I am ordering parts.
...try a gas leak test with soapy water and watch for bubbles or a dunk test (but not with it alight!). Likely culprits are fount to riser joint...
Duane, pardon my nudge here, i hope you don't mind i bring your comments back to your topic. in discussion/thread i quoted you from mirumir of...
After all the disassembly you do. Before using again. Perform the dunk test.
...Unleaded auto fuel, and also join those who recommend you do the dunk test first, then change anything. The 99 is a neat little stove, and...
Yoa, maybe you have a leak, try it with the SRV from 111b or do a dunk test.
...pressure for some reason. What Duane refers to is called a dunk test. The lopsided burn ... if the plate is even across the bell. The hole of...
Separate names with a comma.
