Ok.....great stuff!! An update....I ran the thinner through the entire system and filled the tank 1/2 full. Did 30 pumps (the generator is still...
Arch- I appreciate your input. I’m going to run the lacquer thinner through the entire system. I won’t be able to get to the valve assembly...
I’m going to add the priming cup from an old Rogers Vietnam era stove that I parted out. I think the volume of fuel I poured in for tests was...
Herc/Marc- thanks for both your inputs. I’m going to run the thinner thru the entire system. Marc, after reading your comments I tried 25 pumps...
Just the pump and tank.
An update......I let the lacquer thinner sit in the pump tubing for a week. I didn’t re-inserted the pump housing and push the lacquer thinner...
My dad......
Arch, Here are the photos. The stove comes with a little story. My grandfather worked for the forest service around the mid to late 40s. He...
Arch, I replaced the fuel cap seal with an O-ring. What size flat washer should I use?
Thanks Duck
Arch, It pressurizes just fine. After I restored the leather cup I can pump it 30 times and the next day open it up and hear that very wonderful...
Thanks for the advice. I took the generator off and the fuel was sporadic as well. Could this be the f/a valve? Maybe I didn’t leave the lacquer...
I purchased my first 530 stove and the fuel flow was erratic. So I refurbed the leather cup, replaced the fuel cap O-ring, took the generator out...
I found one online. Once I saw that it was able to unscrew I quickly figured out the issue was it was stuck and stuck tightly. I soaked where the...
Thank you Tony I'll go looking for it.
Recently I purchased an M-1950 Rogers 1964 field stove. I've begun disassembly, removed the burner/preheater cup but the generator stays attached...
Separate names with a comma.
