Thanks. I will do that! -- Sam
Gary (and anyone else who wants to weigh in): I shot 2 videos. The first is shortly after startup. The burner on the left is an almost new...
Gary, Thanks for the info. I've been using the kleenHeat exclusively so I'll give the plain kerosene a try. Yes, I get a small meteor shower...
Bd, When did you film my burners? Seriously, very similar although mine do not have quite as many tongues of yellow flame... But very close....
George, Yes, new jets and needles were fitted early on. Think I'm going to figure out how to create and post a video so you can see what is...
George, Thanks for the posting. I have a couple of follow-up questions for those more experienced than I. First, I've been burning quite a bit...
I've owned the stove for a few months so don't know the whole history. The previous owner told me that he purchased it used about 10 years ago...
I've attached some images of two pairs of burner caps I've pulled from my stove. I'm trying to figure out when to call it a day and replace......
Yes. In an embarrassment of "riches" I also have a complete Taylor's 028 stove that I got a couple of years ago off Craig's List for $200. All...
Doc, These may not be best images. The stainless tank holds 1.5 gallons. You'll note that I replaced the pump with a cap that I installed a...
Thanks to all for kind words. It will be a while before I have action shots -- the boat "fettling" is quite a bit more extensive.... but that's...
Here are some photos of the Taylor's 030 reassembled and fired up. Thanks for advice. Running the burners at full heat appears to burn off the old...
They do splay out a bit when used on a regulated burner. One becomes adept at slipping them on and off inside the Taylors (after burning a couple...
I had promised some pictures of my two stoves. These are works in progress! The first is a Taylors 030 I acquired from a fellow who stored it...
More experimenting. I put everything back together, filled the tank with fresh kerosene and fired it up. Now I get a nice blue flame that...
Thanks for all the suggestions. After reading more I've disassembled the riser/burner from the stove and have run an alcohol wash through the...
2 pictures of the stove with orange flames... [ATTACH] [ATTACH]
I think I might have been over-pumping... 6-10 strokes were fine and the stove lit up. I'm getting quite a bit of orange to the flame. Blue at...
Thanks all. I will experiment a bit more today and report results. On the topic of non return valves, I've searched the site and found some...
Itchy, Yes, the pump rod seems to stick out 1" to 2" after pumping up the tank. I'm giving it about 25 to 30 strokes. Doc, I know the pump...
Separate names with a comma.