@Dinger Burner Washers.Small. Asbestos-free. Pack of 4 - The Fettlebox
There are two standard sizes of heat proof burner washers. I don't remember which ones the Svea Komfur takes, but my spare part set from fettlebox...
I know, and this is my fallback option. But my soldering skills suck so I don't imagine that my brazing skills are any better. I wrote basecamp...
The odd thing is that I had it running reasonably well (although the stream of fuel came out of the jet at a slight angle). I must have gotten the...
I have an Optimus 00 without the original jet nipple. Generic jet nipples from eBay just keep turning when I try to put them in. Is the a...
I live in Herning but I'm originally from Aarhus :content: Nice to meet another Dane here. Så prø' li' å hør' her, ig'å: I get lid gaskets, burner...
I quite like the tool. The other end digs into the hand, but this can be remedied by holding it with a folded rag and since I put it in a vice in...
Just wanted to show off. I finally managed to change a defective NRV on my Svea Komfur. [IMG] I placed a NRV valve key in a small vice that I...
Jet size isn't the only parameter, true, but let's look at an Optifuel and an Omnifuel burning diesel, shall we? (The images are shamelessly...
I just tried out burning kerosene in my Trangia X2 Multifuel (which is just a modified Primus Multifuel) using the gasoline jet (0.32 mm) instead...
My Svea 123R had started burning with yellow lighter flame tips. It had been banged around a little, so I figured the burner plate had probably...
If I were to mount anything else, I would take my Omnilite Ti and put it in the Trangia cup. But now that I got the X2 running properly, nobody...
I had the same problem with mine. I discovered that I need to run it at FULL blast (25-30 pumps on full bottle, valve full open) for about a...
I posted about this earlier in the Stove Chat forum. I'll update the thread once I get some details on the history of this stove from my mother in...
Svea Komfur: [ATTACH] Primus 210L (Høvik) [ATTACH]
Another 1/8 of a turn and no more sputtering, except if I overpump on purpose during startup. Meet the hero of the day: [ATTACH] Thank you,...
BTW, I was told that the stove is from the 50s. It belonged to the mother of the seller, and she was from Norway.
I tightened the nipple about a quarter turn with a 4 mm wrench. This eliminated the leak and almost eliminated the sputtering.
I have ordered the jet nipple removal tool from eBay. I'll tighten the nipple ever so slightly and see if the problem goes away. Thanks kerophile...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Close-ups of the tank and flameshots. Is there anyway...
Separate names with a comma.
