I wouldn't personally trust a brs 8 pump. But you could take a spare just in case Flying with the 12a, or any stove with the fuel tank attached...
It looks like the bolt that holds the burner in place broke off at the braised bolt insert. This is likely caused by long term fatigue. The burner...
You can sil braise this back in place. It is not difficult to learn. But the first time something similar happened to one of my stoves I took it...
I had one of these. It was called go system flexi fuel stove. It was marketed as being able to burn white fuel, kerosene and diesel. But I found...
Flip the stove upsidedown untill it burns out and releases the pressure.
Open and clean the check valve (I think it is red) on the end of your pump tube.
No, They mean make sure that the pump leather (If it is leather) cup is flared out so it touches the siddes of the pump tube.
If you can feel a lot of resistance when you pump - check valve could be stuck. You can open this, clean and inspect it. It is at the end of the...
I always thought those wicks were asbestos. Does anyone know if they are?
Make sure the jet is tight enough. A small leak at the nipple threads can have a big impact on the flame output.
Oh, I see that now. I have heard about MSRs great customer support in the USA. That is the pump off my whisper light. The backwards compatibility...
[ATTACH] All sorted, the cable was the easiest I have ever pulled out. The stove run perfectly ( on unleaded petrol). I seems to run quieter than...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] I just picked up an old xgk. Just the stove, no pump. I don't know anything about it. I have not had...
I don't think people cook in their vestibules in New Zealand much, I never do. But I loaned my tent to someone from the U.k. and they ruined the...
I would imagine the wick is a continuous loop. You could pull it out with strong string ( floss) tied to it the other end, then pull another wick...
I chose the rectus as it was available in New Zealand. No other reason.
I used a rectus 20 on my DIY kap artic. It is smaller than a cejn from a Optimus nova. It worked fine. I still have it, but it has been sitting...
If the screw mount is spinning it needs re soldered. It the screw is spinning in the screw mount, but the screw mount is not spinning, then it...
Are you sure the insert is spinning? Rather than it being a poor fitting screw.
It is not my stove or my problem but here goes, these are Optimus 22s. This insert is spinning freely. I believe is is soldered from the inside,...
Separate names with a comma.
