This is one of the things he said. "Depending on how many he wants would probably do a prototype tool. Cheaper than a production tool" So, it seems do - able right now.
I am trying to say I have a guy that can make a tool to make a short prototype run. That may be enough for Ross to have a supply.
In my research I came across this post by BD. https://classiccampstoves.com/threads/radius-fuel-cap-srv-seal-dimensions.26887/#post-274142 I replied with this: Available currently: https://www.ebay.com/itm/Protect-Ov...-lamp-lantern-Radius-10-46-stove/222281007768 So, I am not convinced that I need to have my friend make a tool to make these, if the seals are available and they work. Ken in NC
Sellers info is incorrect, these do not fit a Radius 46 stove. 26mm is what I received from the seller and what he still lists. 26mm is too large for the 46. Duane
Somewhere, here, was another thread that had 2 dimensions listed for the Radius. One was for another Radius item, and the other was for the stoves. I thought i recalled both stoves used the same size of seal. There are too many current radius seal threads for me to find the post i am looking for. Ken in NC
Hi, Here are a couple of new videos about the Radius SRVs and how they work along with how to make a new gasket and brass sheet. I hope this is helpful. Link to part one Link to part two Cheers, Norman
